Publications

Share / Export Citation / Email / Print / Text size:

International Journal on Smart Sensing and Intelligent Systems

Professor Subhas Chandra Mukhopadhyay

Exeley Inc. (New York)

Subject: Computational Science & Engineering , Engineering, Electrical & Electronic

GET ALERTS

eISSN: 1178-5608

DESCRIPTION

FEATURED ARTICLES

Touch fingerprint sensor based on sensor cell isolation technique with pseudo direct signaling
HYBRID DATA APPROACH FOR SELECTING EFFECTIVE TEST CASES DURING THE REGRESSION TESTING
PERFORMANCE AND ANALYSIS OF AUTOMATIC LICENSE PLATE LOCALIZATION AND RECOGNITION FROM VIDEO SEQUENCES

VOLUME 2 , ISSUE 4 (December 2009) - List of articles

Adaptive Routing Protocol for Reliable Sensor Network Applications

Jiann-Liang Chen/ Yu-Ming Hsu/ I-Cheng Chang

The existing routing protocol for sensor networking can be divided into proactive routing protocol, reactive routing protocol and hybrid routing protocol. Each routing protocol has its merits and shortcomings. The lifetime will end when the working routing protocol can no longer support the whole wireless sensor network. An adaptive method based on redundancy node and dual routing protocol was proposed in the study. Redundancy node, when wireless sensor network is being deployed, can divide the (..)

DOI: 10.21307/ijssis-2017-365

MECHANISM OF TRACE LEVEL H2S GAS SENSING USING RF SPUTTERED SnO2 THIN FILMS WITH CuO CATALYTIC OVERLAYER

Arijit Chowdhuri/ Divya Haridas/ K. Sreenivas/ Vinay Gupta

H2S gas sensing response characteristics of bare SnO2 thin films and heterostuctures with nanolayer (10 nm) of Cu and CuO are studied. Changes in resistance values, occurring with integration of Cu and CuO nanolayers on SnO2 is acquired real-time, and compared. Rise in sensor resistance after introduction of Cu and CuO nanolayers on SnO2 sensing layer is understood to enhance the sensing response characteristics. Formation of space charge region between p-type CuO and n-type SnO2 and difference (..)

DOI: 10.21307/ijssis-2017-366

UHF RFID METAL TAG APPLYING TO LICENSE PLATE USING METAL SHIELDING AND WATERTIGHT METHODS

Gi-Hyun Hwang/ Kyoung-Hwan Cha/ Sachin Bhardwaj/ Dae-Seok Lee

This paper describes a design for RFID (Radio Frequency Identification) tag using license plate attached the vehicle bumper in 900 MHz band. The implemented metal tag for a license plate is applied metal shielding method, watertight method of RFID tag, and metal corrosion protection method using silk screen technique. Moreover, its range of the fabricated tag antenna that the license plate and the vehicle bumper were fixed by volt and nut was observed 8.2m. This measured readable range showed ab(..)

DOI: 10.21307/ijssis-2017-367

CRACK IDENTIFICATION OF A ROTATING SHAFT WITH INTEGRATED WIRELESS SENSOR

F. Andrés Bejarano/ Yi Jia/ Frederick Just

This paper presents a novel real-time crack identification method to determine the position and depth of a transverse open crack on a rotating shaft. A newly developed wireless sensor capable of being mounted directly on the shaft is employed to monitor acceleration at different points of the shaft in a rotating coordinate system. The vibration parameters obtained from the wireless sensors and Finite Element Model provide operational data to perform Modal Analysis with different mock crack posit(..)

DOI: 10.21307/ijssis-2017-368

MODELING AND CONTROLLER DESIGN FOR THE VVS-400 PILOT SCALE HEATING AND VENTILATION SYSTEM

M.F. Rahmat/ N.A. Mohd Subha/ Kashif M.Ishaq/ N. Abdul Wahab

In this paper, a heating and ventilation model VVS-400 from Instrutek, Larvik, Norway is modeled using ARX model structure and linear black-box technique. The conventional PID controller and artificial Fuzzy controller are designed based on the approximated plant model and real plant model. The approximated plant model is estimated using System Identification approach while the real plant model is developed by interfacing the Real-time Windows Target toolbox in Matlab with real VVS-plant by usin(..)

DOI: 10.21307/ijssis-2017-369

SINGLE SH-SAW SENSOR AS A DISTRIBUTED SENSOR ARRAY FOR LIQUIDS RECOGNITION

R. G. Kryshtal/ A.V. Medved

Basic possibility to use single-channel shear-horizontal surface acoustic waves sensor constructed as a delay line on multilayered structure with 36О YX LiTaO3 substrate for liquids recognition has been proposed. The changes under analytes influence of the sensor pulse responses obtained by transformation to time domain of one of the S-parameters measured in frequency domain have been used as sensor responses. Examples of responses to some liquid analytes have been demonstrated for a sensor base(..)

DOI: 10.21307/ijssis-2017-370

PERFORMANCE ANALYSIS OF PATIENT SPECIFIC ELMAN-CHAOTIC OPTIMIZATION MODEL FOR FUZZY BASED EPILEPSY RISK LEVEL CLASSIFICATION FROM EEG SIGNALS

Dr.R HariKumar/ T. Vijayakumar

This paper aims to analyze the optimization of Epilepsy risk levels from EEG signals using Fuzzy based Elman-Chaotic Optimization. The EEG (Electroencephalogram) signals of twenty patients are collected from Sri Ramakrishna Hospitals at Coimbatore. The raw EEG signals are sampled and various parameters like energy, energy, variance, peaks, sharp and spike waves, duration, events and covariance. The fuzzy techniques are applied as a first level classifier to classify the risk levels of epilepsy b(..)

DOI: 10.21307/ijssis-2017-371

An Intelligent Fuzzy Controller for Air-Condition with Zigbee Sensors

Tzu-Ming Wang/ I-Ju Liao/ Jen-Chi Liao/ Tain-Wen Suen/ Wei-Tsong Lee

In recent years, the research and development of energy-saving control in air-condition system has become a hot spot with the advance of science and technology. In this paper, we proposed a fuzzy control mechanism for air-condition system, which combines the fuzzy control and multi-point sensing technology. When people feel cooler or hotter indoor, the air condition should promptly detect the temperature variance and switch the temperate between hot and cool smoothly. Therein an intelligent fuzz(..)

DOI: 10.21307/ijssis-2017-372

OPTICAL FIBER HUMIDITY SENSOR BASED ON LOSSY MODE RESONANCES

M. Hernaez/ C.R. Zamarreño/ I. Del Villar/ F.J. Arregui/ I.R. Matias

A novel optical fiber humidity sensor based on lossy mode resonances (LMR) has been developed. LMRs are supported here by a thin Indium Tin Oxide (ITO) coating fabricated onto an optical fiber core via a sol-gel dip coating. ITO coated optical fiber devices present a resonant maximum absorption peak in the infra-red region which is shifted to higher wavelengths when the refractive index of the medium in contact with the ITO layer is increased. A polymeric structure is deposited onto this ITO usi(..)

DOI: 10.21307/ijssis-2017-373

FPGA BASED MAXIMUM POWER POINT TRACKER OF PARTIALLY SHADED SOLAR PHOTOVOLTAIC ARRAYS USING MODIFIED ADAPTIVE PERCEPTIVE PARTICLE SWARM OPTIMIZATION

Shubhajit Roy Chowdhury/ Dipankar Mukherjee/ Hiranmay Saha

The paper presents a Field Programmable Gate Array (FPGA) based tracker to accurately track the maximum power point (MPP) of a photovoltaic (PV) array. The tracking logic realized on FPGA is based on a modified version of Adaptive Perceptive Particle Swarm Optimization (APPSO) technique. Photovoltaic generation systems use MPP tracker because the photovoltaic array exhibits multiple maxima in the power voltage characteristic under partially shaded conditions. Compared to PSO, the APPSO offers fl(..)

DOI: 10.21307/ijssis-2017-374

No Record Found..
Page Actions