Share / Export Citation / Email / Print / Text size:

International Journal of Advanced Network, Monitoring and Controls

Xi'an Technological University

Subject: Computer Science , Software Engineering


eISSN: 2470-8038



Quadrotor Formation Control Method Based on Graph and Consistency Theory
Advanced Dynamic Autonomous Knowledge Learning Method for Distance Learning

VOLUME 2 , ISSUE 1 (March 2017) - List of articles

An Investigation on Tree-Based Tags Anti-Collision Algorithms in RFID

Su Xiaohao/ Liu Baolong

The tree-based tags anti-collision algorithm is an important method in the anti-collision algorithms. In this paper, several typical tree algorithms are evaluated. The comparison of algorithms is summarized including time complexity, communication complexity and recognition, and the characteristics and disadvantages of each algorithm are pointed out. Finally, the improvement strategies of tree anti-collision algorithm are proposed, and the future research directions are also prospected.

DOI: 10.1109/iccnea.2017.19

Model of Ball Mill Based on the CPS

Li Cunfang/ Zhang Taohong/ Zhang Dezheng/ Wang Huan/ Zeng Qingfeng/ Sun Yi

With the development of the new technology of intelligent manufacturing and cyber physical system, a new scheme is proposed for designing of predictive production based on ball mill. First, physical model (PM) and the model based on data (cyber model, CM) are discussed. Then, the combination of physical model and cyber model (CPM) is realized. Physical model is established according to the volume balance formula and the material balance formula. Cyber model uses the algorithm of the extreme lear(..)

DOI: 10.1109/iccnea.2017.14

BIM-technologies for Buildings Operation Experiment in MGSU

Andrey Volkov/ Pavel Chelyshkov

This article describes the approach of experts of the National Research Moscow State University of Civil Engineering (MGSU) to the construction of modern operating systems in buildings using BIM-technology. This article was performed within the Russian State tasks MGSU project “Methodology of ideas, design and verification of energy-efficient engineering systems conventionally abstract objects (on formal models of buildings)”.

DOI: 10.2991/icsnce-16.2016.128

UAV Dynamic Simulation Model Establishment Method Based on Simulink/Aerosim

Chen GuoShao/ Yang Sen

Aiming at the problem of UAV dynamic modeling with high difficulty and poor timeliness, a UAV dynamic model based on Simulink/Aerosim rapid method is established in this paper. Based on the analysis of UAV system internal structure, using Simulink/Aerosim toolbox to build six degrees of freedom dynamic simulation model of unmanned aerial vehicle and the setting of relevant parameters and RTW environment configuration process is analyzed, finally, by analyzing the typical flight parameters of a c(..)

DOI: 10.1109/iccnea.2017.17

The Research of Information Delay in the Neural Network Forecast Remote Control System

Xu Shuping/ Chen Yiwei/ Cheng Xinhua/ Su Xiaohui

Aiming at the issues of random delay and delay uncertainty in both the before channel and feedback channel for network control system, the root causes of random delay influence closed-loop control system by case is analysis, and the predictive control method based on neural network to solve the feasibility of existence network random delay in control system closed-loop control has provided. Simulation results show that the method can reflect and predict the delay characteristics of between measu(..)

DOI: 10.21307/ijanmc-2017-001

Seven-spot Ladybird Optimization Algorithm Based on Bionics Principle

Wei Feng-tao/ Lu Feng-yi/ Zheng Jian-ming

For solving the problems of modern intelligence algorithms such as slow convergence and low precision, a new algorithm based on bionics principle has been proposed which is inspired by the foraging behavior of seven-spot ladybirds in the nature. By analyzing the bionic principle of Seven-spot ladybird Optimization(SLO), we simulate the region search pattern of predation of seven-spot ladybirds ,combining fast extensive search with careful and slow intensive search of the ladybirds,meanwhile we u(..)

DOI: 10.1109/iccnea.2017.23

DSM Modelling for Digital Design Using Verilog HDL

Xing Xue/ Yao Chen/ Junchao Wei

In the practice of product design, the efficient control of complexity has increasinglygained importance. The Dependency Structure Matrix (DSM) has proved to be a useful tool for analysing system structure and managing structural complexity. In order to provide a deep insight of system structure in designing Verilog HDL source code artefacts for digital system designers and project managers, the paper proposes a DSM modelling method based on the characteristics of the digital system structural m(..)

DOI: 10.21307/ijanmc-2017-002

An Improved Universal Evidence Combination Method

Yongchao Wei

The Dempster-Shafer evidence combination method will appear inconsistent conclusions for the conflict evidence. One new universal evidence combination method was proposed. According to the concept of the Pearson correlation coefficient. Evidence distances which represent the conflict degree were calculated, and then the weight coefficient were further converted. The evidences probability were redistributed by using the weight coefficient. Finally, the improved synthesis rule was used to the evid(..)

DOI: 10.1109/iccnea.2017.16

Review on RFID Identity Authentication Protocols Based on Hash Function

Yang Bing/ Liu Baolong/ Chen Hua

Radio frequency identification (RFID) is one of the key technologies of Internet of Things, which have many security issues in an open environment. In order to solve the communication problem between RFID tags and readers, security protocols has been improved constantly as the first choice. But the form of attack is also changing constantly with the development of technology. In this paper we classify the security protocols and introduce some problems in the recent security protocols.

DOI: 10.1109/iccnea.2017.20

Quad-rotor UAV Control Method Based on PID Control Law

Yang Sen/ Wang Zhongsheng

This paper studies on the dynamics model and control method of quad-rotor UAV for research. Firstly analyzes the dynamic characteristic of quad-rotor UAV and establishes the nonlinear dynamics model of quad-rotor UAV; and then applies the PID control to three channels of pitch, roll and yaw based on the established model, and the simulation results show that PID control is effective for the quad-rotor UAV control with the ideal conditions. Finally analyzes the results of PID control under the ci(..)

DOI: 10.1109/iccnea.2017.24

Application of Computational Tools to Analyze and Test Mini Gas Turbine

Haifa El-sadi/ Anthony Duva

Performance analysis and testing of the Mini Gas Turbine was carried out in Wentworth Institute of Technology’s Thermodynamics Laboratory. The computational tool allows students to focus on more design-oriented problems. Furthermore, students had the ability to see immediate results to variations of the design conditions as well as different parameters that would affect the mini turbine. This project was carried out as a senior design project (Capstone), the students updated the existing data ac(..)

DOI: 10.21307/ijanmc-2017-003

The Research of Direct Torque Control Based on Space Vector Modulation

Su Xiaohui/ Chen Guodong/ Xu Shuping

In order to solve the conventional direct torque control contradiction between the dynamic and static performance ,a permanent magnet synchronous motor system direct torque control architecture is proposed based on space vector modulation strategy . In this method flux and torque are controlled through stator voltage components in stator fluxlinkage coordinate axes and space vector modulation is used to control inverters.The simulation verifies that SVM-DTCis capable of effectively improving the(..)

DOI: 10.21307/ijanmc-2017-004

Behavior Control Algorithm for Mobile Robot Based on Q-Learning

Shiqiang Yang/ Congxiao Li

In order to adapt to navigation in unknown environment, the mobile robot must have intelligent abilities, such as environment cognition, behavior decision and learning. The navigation control algorithm is researched based on Q learning method in this paper. Firstly, the corresponding environment state space is divided. The action sets mapping with states are set. And the reward function is designed which combines discrete reward returns and continuous reward. The feasibility of this algorithm is(..)

DOI: 10.1109/iccnea.2017.26

Method of Determining Relevance of Changing Processes of Condition Building Parameters

Anna Doroshenko/ Andrey Volkov

In the modern world it is increasingly referred to the concept of intelligent building. Intelligent building referred to above all energy-efficient building, using alternative energy sources, as well as equipped with modern energy efficient technologies that reduce the energy consumption of the building in general. But for all the time and does not set forth a definition of intelligence buildings, which leads to different opinions and approaches to the understanding of the term.

DOI: 10.2991/icsnce-16.2016.125

No Record Found..
Page Actions