Share / Export Citation / Email / Print / Text size:

International Journal of Advanced Network, Monitoring and Controls

Xi'an Technological University

Subject: Computer Science , Software Engineering


eISSN: 2470-8038



Quadrotor Formation Control Method Based on Graph and Consistency Theory
Advanced Dynamic Autonomous Knowledge Learning Method for Distance Learning

VOLUME 4 , ISSUE 4 (December 2019) - List of articles

Nuclear Fusion Power – An Overview of History, Present and Future

Stewart C. Prager

Summary Fusion power offers the prospect of an almost inexhaustible source of energy for future generations, but it also presents so far insurmountable engineering challenges. The fundamental challenge is to achieve a rate of heat emitted by a fusion plasma that exceeds the rate of energy injected into the plasma. The main hope is centered on tokamak reactors and stellarators which confine deuterium-tritium plasma magnetically.

DOI: 10.21307/ijanmc-2019-064

Research on Improved Adaptive ViBe Algorithm For Vehicle Detection

Kun Jiang/ Jianguo Wang

Abstract Vehicle detection is an important step in vehicle tracking and recognition in video environment. Vibe algorithm is a moving target detection algorithm based on background difference method. Based on the traditional ViBe algorithm, this paper introduces three-frame difference method combined with ViBe algorithm to speed up the elimination of ghosts, and proposes an adaptive Vibe algorithm, which defines two kinds of vehicle detection errors and their corresponding error functions. Then, (..)

DOI: 10.21307/ijanmc-2019-065

Review of Development and Application of Future Network (IPV9)

Lou Peide/ Liu Zhang

DOI: 10.21307/ijanmc-2019-066

Detection of Blink State Based on Fatigued Driving

Lei Chao/ Wang Changyuan/ Li Guang/ Shi Lu

Abstract In recent years, with the improvement of the national economy, the penetration rate of automobiles has been increasing, and traffic accidents have also increased. Fatigue driving is the main factor in many traffic accidents. Fatigue driving can cause the driver’s inattention, slow response, and make wrong decisions on danger signals, which affect the driver’s personal safety. In modern development, driving safety is developing towards intelligence and safety. Therefore, the detection of(..)

DOI: 10.21307/ijanmc-2019-067

Research of Network Closed-loop Control System Based on the Model Predictive Control

Xu Shuping/ Wang Shuang/ Guo yu/ Su Xiaohui

Abstract Uncertainty latency of the remote closed-loop control system in information transmission through Internet, Analysis delays how to influence closed-loop control system. Based on predictive control method of neural network, research the application of closed-loop control system control methods under a random network delay. Simulation results show that: This method is able to reflect and predict the delay characteristics of between network path represented by the measured data, and can be (..)

DOI: 10.21307/ijanmc-2019-068

Internet of Things Application in Satellite Communication in Power Transmission, Transform and Distribution

Dong Chuang

Abstract In the national grid enterprise system, the geographical environment of transmission, substation lines and equipment distribution is very complicated. Transmission lines and substation equipment built in complex environments such as plateaus, forests, canyons and borders are often subjected to earthquakes, floods and blizzards. The threat of mudslide disasters, the ground communication network is greatly affected by extreme natural disasters, and it is impossible to repair and rescue in(..)

DOI: 10.21307/ijanmc-2019-069

Improved Stereo Vision Robot Locating and Mapping Method

Yu Haige/ Yu Fan/ Wei Yanxi

Abstract Vision-based SLAM has an outstanding problem is not work when the camera fast motion, or camera operating environment characterized by scarce. Aiming at this problem, this paper proposes a SLAM method of IMU and vision fusion. This article uses a stereo camera to extract the image ORB feature points. During the camera movement, if the number of extracted feature points is less than a certain threshold and the camera movement cannot be estimated or the estimated camera rotation and trans(..)

DOI: 10.21307/ijanmc-2019-070

Design and Research of Future Network (IPV9) API

Xu Yinqiu/ Xie Jianping

Abstract Socket is a way of process communication, that is used it to invoke some API function to realize the distribution network libraries in different host of data exchange between the relevant process. According to the TCP/IP protocol assigned to the network address of the local host, to communicate between the two processes, the host must know the other’s location first, that is, the IP of the other host. At the same time, to get the port number, it is used to identify the local communicati(..)

DOI: 10.21307/ijanmc-2019-071

A Study on the Sinter Brazing Joint of Powder Metal Components

Pujan Tripathi/ George Yang

Abstract The research focuses on the development of a new joint method, the sinter brazing of powder metal components. Various kinds of powder metallurgy composition were tested in the sinter brazing joint, mainly to study the operating conditions, strength of the joint. Although each of these processes brings about different results in metal, all of them involve three basic steps: heating, soaking, and cooling. Heat treatment such as heating, soaking, cooling, hardening, tampering has been inve(..)

DOI: 10.21307/ijanmc-2019-072

Application of the Source Encryption Algorithm Model in the Power Industry

Jiao Longbing

Abstract With the development of Internet technology and Internet of Things technology, the Internet of Everything has become a hot topic, and in March 2019, the National Grid for the first time clarified the definition of the Pan-In Power Internet of Things, pointing out that the company’s most urgent and important task is to accelerate the construction of the Pan-In Power Internet of Things. The security of Data Transfer on-line at any time is particularly important, in order to ensure the sec(..)

DOI: 10.21307/ijanmc-2019-073

On the RFID Information Query Technology Based on IPV9

Li Guiping/ Xue Lei

Abstract Since coding format of RF label is inconsistent with the protocol format of the information server’s network, a design scheme of network architecture is proposed to achieve the connectivity between the decimal network based on IPV9 and the Internet network based on IPV4/IPV6. And also, two ways of information’s Query and connectivity based on D-ONS and direct routing between the decimal network is devised by using the expert modules. The experiment results shows that both the two ways c(..)

DOI: 10.21307/ijanmc-2019-074

A Solution to Incompatibility Between IPv6 and IPv4 Communications

Khaled Omar Ibrahim Omar

Abstract It has been about one year since last hearing anything about the Internet Protocol v10 (IPv10) proposal while this week it’s now available in draft form. While IPv6 isn’t widely-adopted around the globe yet, IPv10 is already in development and helps to address some of the woes of IPv6. IPv10 is designed to allow IPv6 addresses to communicate to/from IPv4 addresses. IPv10 hopes to speed the adoption to IPv6 addressing by making it more backwards compatible with IPv4 with allowing the two(..)

DOI: 10.21307/ijanmc-2019-075

No Record Found..
Page Actions