DESIGN OF SRAM ARCHITECTURE WITH LOW POWER WITHOUT AFFECTING SPEED USING FINFET

Publications

Share / Export Citation / Email / Print / Text size:

International Journal on Smart Sensing and Intelligent Systems

Professor Subhas Chandra Mukhopadhyay

Exeley Inc. (New York)

Subject: Computational Science & Engineering , Engineering, Electrical & Electronic

GET ALERTS

eISSN: 1178-5608

DESCRIPTION

4
Reader(s)
17
Visit(s)
0
Comment(s)
0
Share(s)

VOLUME 10 , ISSUE 5 (December 2017) > List of articles

Special Issue

DESIGN OF SRAM ARCHITECTURE WITH LOW POWER WITHOUT AFFECTING SPEED USING FINFET

Mr.S.Mohammed Sulaiman * / B. Jaison / M.Anto Bennet / M. Vijay / V.Pandi Selvam / P. Anandakumar

Keywords : Static random access memory (SRAM), Low voltage operation, Low power consumption

Citation Information : International Journal on Smart Sensing and Intelligent Systems. Volume 10, Issue 5, Pages 295-310, DOI: https://doi.org/10.21307/ijssis-2017-253

License : (CC BY-NC-ND 4.0)

Received Date : 27-May-2017 / Accepted: 15-June-2017 / Published Online: 01-September-2017

ARTICLE

ABSTRACT

In average 8T SRAM Architecture, it requires maximum number of transistor counts and does not need any write back scheme. To achieve the higher word line (WL) Voltage, the bit line (BL) is connected to the gate of the read buffer SRAM Architecture. That boosted voltage is not used when the threshold voltage is high. Its leads to the reduction of read stability of the SRAM Design. In that case, the gate terminal of the SRAM Architecture is not connected to the buffer results a large delay. To overcome the disadvantage of the average 8T SRAM architecture, the 6T SRAM Design is proposed. In proposed 6T SRAM Design, the number of transistor counts and Power is reduced than the existing design. Various factors of the proposed SRAM Architecture, which stores multiple bits in terms of power and transistor counts. The simulation of 6T SRAM design is carried out in S-Edit and the synthesized in T-Spice.

Content not available PDF Share

FIGURES & TABLES

REFERENCES

[1] Aizat Azmi, Ahmad Amsyar Azman, Sallehuddin Ibrahim, and Mohd Amri Md Yunus, “Techniques In Advancing The Capabilities Of Various Nitrate Detection Methods: A Review”, International Journal on Smart Sensing and Intelligent Systems., VOL. 10, NO. 2, June 2017, pp. 223-261.

[2] Tsugunosuke Sakai, Haruya Tamaki, Yosuke Ota, Ryohei Egusa, Shigenori Inagaki, Fusako Kusunoki, Masanori Sugimoto, Hiroshi Mizoguchi, “Eda-Based Estimation Of Visual Attention By Observation Of Eye Blink Frequency”, International Journal on Smart Sensing and Intelligent Systems., VOL. 10, NO. 2, June 2017, pp. 296-307.

[3] Ismail Ben Abdallah, Yassine Bouteraa, and Chokri Rekik , “Design And Development Of 3d Printed Myoelctric Robotic Exoskeleton For Hand Rehabilitation”, International Journal on Smart Sensing and Intelligent Systems., VOL. 10, NO. 2, June 2017, pp. 341-366.

[4] S. H. Teay, C. Batunlu and A. Albarbar, “Smart Sensing System For Enhanceing The Reliability Of Power Electronic Devices Used In Wind Turbines”, International Journal on Smart Sensing and Intelligent Systems., VOL. 10, NO. 2, June 2017, pp. 407- 424

[5] SCihan Gercek, Djilali Kourtiche, Mustapha Nadi, Isabelle Magne, Pierre Schmitt, Martine Souques and Patrice Roth, “An In Vitro Cost-Effective Test Bench For Active Cardiac Implants, Reproducing Human Exposure To Electric Fields 50/60 Hz”, International Journal on Smart Sensing and Intelligent Systems., VOL. 10, NO. 1, March 2017, pp. 1- 17

[6] P. Visconti, P. Primiceri, R. de Fazio and A. Lay Ekuakille, “A Solar-Powered White Led-Based Uv-Vis Spectrophotometric System Managed By Pc For Air Pollution Detection In Faraway And Unfriendly Locations”, International Journal on Smart Sensing and Intelligent Systems., VOL. 10, NO. 1, March 2017, pp. 18- 49

[7] Samarendra Nath Sur, Rabindranath Bera and Bansibadan Maji, “Feedback Equalizer For Vehicular Channel”, International Journal on Smart Sensing and Intelligent Systems., VOL. 10, NO. 1, March 2017, pp. 50- 68

[8] Yen-Hong A. Chen, Kai-Jan Lin and Yu-Chu M. Li, “Assessment To Effectiveness Of The New Early Streamer Emission Lightning Protection System”, International Journal on Smart Sensing and Intelligent Systems., VOL. 10, NO. 1, March 2017, pp. 108- 123

[9] Iman Heidarpour Shahrezaei, Morteza Kazerooni and Mohsen Fallah, “A Total Quality Assessment Solution For Synthetic Aperture Radar Nlfm Waveform Generation And Evaluation In A Complex Random Media”, International Journal on Smart Sensing and Intelligent Systems., VOL. 10, NO. 1, March 2017, pp. 174- 198

[10] P. Visconti ,R.Ferri, M.Pucciarelli and E.Venere, “Development And Characterization Of A Solar-Based Energy Harvesting And Power Management System For A Wsn Node Applied To Optimized Goods Transport And Storage”, International Journal on Smart Sensing and Intelligent Systems., VOL. 9, NO. 4, December 2016 , pp. 1637- 1667

[11] YoumeiSong,Jianbo Li, Chenglong Li, Fushu Wang, “Social Popularity Based Routing In Delay Tolerant Networks”, International Journal on Smart Sensing and Intelligent Systems., VOL. 9, NO. 4, December 2016 , pp. 1687- 1709

[12] Seifeddine Ben Warrad and OlfaBoubaker, “Full Order Unknown Inputs Observer For Multiple Time-Delay Systems”, International Journal on Smart Sensing and Intelligent Systems., VOL. 9, NO. 4, December 2016 , pp. 1750- 1775

[13] Rajesh, M., and J. M. Gnanasekar. "Path observation-based physical routing protocol for wireless ad hoc networks." International Journal of Wireless and Mobile Computing 11.3 (2016): 244-257.

[14] Rajesh, M., and J. M. Gnanasekar. "Path Observation Based Physical Routing Protocol for Wireless Ad Hoc Networks." Wireless Personal Communications: 1-23.

[15] M. Rajesh., Traditional Courses into Online Moving Strategy. The Online Journal of Distance Education and e-Learning 4 (4), 19-63.

[16] Rajesh M and Gnanasekar J.M. Error- Lenient Algorithms for Connectivity Reinstallation in Wireless Adhoc Networks. International Journal of Advanced Engineering Technology; 7(1), pp 270-278, 2016.

[17] M. Rajesh and J.M. Gnanasekar., GCC over Heterogeneous Wireless Ad hoc Networks. Journal of Chemical and Pharmaceutical Sciences, 195-200.

[18] Rajesh, M and J.M. Gnanasekar., "Congestion Controls Using AODV Protocol Scheme For Wireless Ad-Hoc Network." Advances in Computer Science and Engineering 16 (1-2), 19.

[19] Rajesh M, Gnanasekar J. M. Sector Routing Protocol (SRP) in Ad-hoc Networks, Control Network and Complex Systems 5 (7), 1-4, 2015.

[20] Rajesh M, Gnanasekar J. M. Routing and Broadcast Development for Minimizing Transmission Interruption in Multi rate Wireless Mesh Networks using Directional Antennas, Innovative Systems Design and Engineering 6 (7), 30-42.

[21] W. N. N. Hung, X. Song, G. Yang, J. Yang, and M. A. Perkowski, “Optimal synthesis of multiple output boolean functions using a set of quantum gates by symbolic reachability analysis,” IEEE Trans. on CAD of Integrated Circuits and Systems, vol. 25, no. 9, pp. 1652–1663, 2006.

[22] F. Sharmin, M. M. A. Polash, M. Shamsujjoha, L. Jamal, and H. M. Hasan Babu, “Design of a compact reversible random access memory,” in 4th IEEE International Conference on Computer Science and Information Technology, vol. 10, june 2011, pp. 103–107.

[23] Dr. AntoBennet, M, Sankar Babu G, Suresh R, Mohammed Sulaiman S, Sheriff M, Janakiraman G ,Natarajan S, “Design & Testing of Tcam Faults Using TH Algorithm”, Middle-East Journal of Scientific Research 23(08): 1921-1929, August 2015 .

[24] Dr. AntoBennet, M “Power Optimization Techniques for sequential elements using pulse triggered flipflops”, International Journal of Computer & Modern Technology , Issue 01 ,Volume01 ,pp 29-40, June 2015.

EXTRA FILES

COMMENTS