UNCERTAINTY ANALYSIS OF STRAIN GAGE CIRCUITS: INTERVAL METHOD AND INTERVAL ALGORITHM

Publications

Share / Export Citation / Email / Print / Text size:

International Journal on Smart Sensing and Intelligent Systems

Professor Subhas Chandra Mukhopadhyay

Exeley Inc. (New York)

Subject: Computational Science & Engineering , Engineering, Electrical & Electronic

GET ALERTS

eISSN: 1178-5608

DESCRIPTION

5
Reader(s)
7
Visit(s)
0
Comment(s)
0
Share(s)

VOLUME 2 , ISSUE 3 (September 2009) > List of articles

UNCERTAINTY ANALYSIS OF STRAIN GAGE CIRCUITS: INTERVAL METHOD AND INTERVAL ALGORITHM

B. Vasuki * / M. Umapathy * / A. R. Senthilkumarr

Keywords : Interval analysis, Uncertainty analysis, Strain gages, Interval Optimization

Citation Information : International Journal on Smart Sensing and Intelligent Systems. Volume 2, Issue 3, Pages 477-489, DOI: https://doi.org/10.21307/ijssis-2017-362

License : (CC BY-NC-ND 4.0)

Published Online: 03-November-2017

ARTICLE

ABSTRACT

This paper presents uncertainty analysis of a strain gage based instrumentation systems. This has been carried out by interval method and classical methods and is verified by the mean value algorithm based on interval arithmetic. The quarter, half and full bridge configuration of strain gage based circuits are considered to illustrate the analysis.

Content not available PDF Share

FIGURES & TABLES

REFERENCES

[1] John P Bently, “Principles of Measurement Systems”, Pearson education, Third edition, 2003
[2] Dongli Li, Xianning He, Jin Zhang, Yan Deng, Reongxiang Zhao, “Stastical Circuit analysis based on SABER”, IEEE, Proceedings of Power Conversion Conference, PCC-Osaka, Vol -2, April ,2002.
[3] Julius Bajcsy, Peter Bajcsy, Resulting error of measurement chain, SICON’01 Sensors for Industry Conference, pp 296-298, 2001.
[4] B.D.Hall, Propagating uncertainty in instrumentation systems, IEEE Trans on Instrumentation and Measurement, Vol- 54, No- 6, pp 2376-2380, 2005.
[5] Shouxiang Wang, Zhijie, Chengshan Wang, Power System transient stability simulation under uncertainty based on interval method, IEEE International Conference on Power System Technology, pp1-6,2006.
[6] Lubomir Kolev, Worst-Case Tolerance Analysis of Linear DC and AC Electric Circuits, Trans on Circuits and Systems—I: Fundamental theory and applications, Vol- 49, No- 12, pp- 1693-1701,2002.
[7] D.M.W.Leenaerts, Application of interval analysis for circuit design, IEEE Trans on Circuits and Systems, Vol-37, No- 6, pp 803-807,1990.
[8] A. Cirillo, N.Femia, Calculation of internally controlled switching instants in switched RLC circuits using interval analysis, IEEE International Symposium on Circuits and Systems ISCAS’96 ‘Connecting the World’, Vol- 1, pp 593-596,1996.
[9] A.K.Al-Othman, M.R.Irving, A Comparative study of two methods for uncertainty analysis in power system state estimation, IEEE Transactions on Power Systems, Vol- 20, No -2, pp 1181-1182, 2003.
[10] Stig Skelobe, True worst case analysis of linear electrical circuits by interval arithmetic, IEEE Trans on Circuits and Systems, Vol -CAS-26, pp 874-879,1979.
[11] R E Moore, “Methods and applications of Interval Analysis”, SIAM, Philadelphia, 1979.
[12] L V Kolev, “Interval methods for Circuit Analysis”, World Scientific Publishing Co.Pvt.Ltd, Technical University of Sofia, Advanced Series on Circuits and Systems, Vol 1, 1993.
[13] Lubomir V Kolev, Valeri M Mladenov , Simon S Vladov, Interval mathematics Algorithms for tolerance analysis, IEEE Trans on Circuits and Systems, Vol-35, No-8, pp 967-975,1988.
[14] S.P.Shary, Randomized algorithms in interval global optimization, Numerical analysis and applications, Vol-1, No-4, pp-376-389, 2008.
[15] Claudio M. Rocco. S, “Variability analysis of electronic systems: classical & interval methods”, IEEE proceedings Annual Reliability and Maintainability Symposium, pp.188-192, 1997.

EXTRA FILES

COMMENTS