NON-INVASIVE CHARACTERIZATION OF TOTAL HIP ARTHROPLASTY BY MEANS OF PASSIVE ACCELERATION MEASUREMENT

Publications

Share / Export Citation / Email / Print / Text size:

International Journal on Smart Sensing and Intelligent Systems

Professor Subhas Chandra Mukhopadhyay

Exeley Inc. (New York)

Subject: Computational Science & Engineering, Engineering, Electrical & Electronic

GET ALERTS

eISSN: 1178-5608

DESCRIPTION

3
Reader(s)
3
Visit(s)
0
Comment(s)
0
Share(s)

VOLUME 3 , ISSUE 1 (March 2010) > List of articles

NON-INVASIVE CHARACTERIZATION OF TOTAL HIP ARTHROPLASTY BY MEANS OF PASSIVE ACCELERATION
MEASUREMENT

M. Lieschnegg * / M. Zacherl / B. Lechner / C. Weger / A. Fuchs

Keywords : Total hip arthroplasty, Non-invasive measurement, Failure characterization, Acceleration measurement, wear detection

Citation Information : International Journal on Smart Sensing and Intelligent Systems. Volume 3, Issue 1, Pages 75-87, DOI: https://doi.org/10.21307/ijssis-2017-380

License : (CC BY-NC-ND 4.0)

Published Online: 13-December-2017

ARTICLE

ABSTRACT

This paper presents a non-invasive measurement method to detect and characterize failures and material imperfections in total joint prostheses based on acceleration measurement. Therefore, a prototype sensor has been developed to fulfill the requirements of a medical-technical sensor. This sensor has been tested on patients with total hip arthroplasty. Special emphasis is put on the real-time processing of measurement data by means of intelligent signal processing as well as reliable and repeatable measurement procedures, including standardized positions for the sensor front-end and a standardized motion-sequence the patient is performing.

Content not available PDF Share

FIGURES & TABLES

REFERENCES

[1] R. Puers, M. Catrysse, G. Vandevoorde, R.J. Collier, E. Louridas, F. Burny, M.Donkerwolcke, F. Moulart, A Telemetry System for the Detection of Hip Prosthesis Loosening by Vibration Analysis, Elsevier Sensors and Actuators, vol. 85, 2000, pp. 42-47.
[2] K.S. Kisielinks, Device and Method for Detecting the Wear of an Implant Material and Correspondingly Produced Implant, German Patent, DE 10 2007 006 086A1, 2007.
[3] A.P. Georgiou. J.L. Cunningham, Accurate Diagnosis of Hip Prosthesis Loosening Using a Vibrational Technique, Clinical Biomechanics, vol. 16, 2001, pp. 315-323.
[4] P.L.S. Li, N.B. Jones, P.J. Gregg, Vibration Analysis in the Detection of Total Hip Prosthetic Loosening, Med. End. Phys., vol. 18, nr. 7, 1996, pp. 596-600.
[5] D. Glaser, R.D. Komistek, H.E. Cates, M.R. Mahfouz, Clicking and Squeaking: In Vivo
Correlation of Sound and Separation for Different Bearing Surfaces, Journal of Bone and Joint Surgery, vol. 90-A, Nr. 4, 2008.
[6] B. Lechner, M. Pircher, Analysis of Imperfection Measurements of Structural Members,Thin-Wall Struct, vol. 43, 2005, pp. 351-374.
[7] P. Geladi, B.R. Kowalski, Partial Least-Squares Regression: a Tutorial, Analytica Chimica Acta, vol. 185, 1986, pp. 1-17.
[8] M. Hu, S. Huihe, Autoregressive Spectral Analysis Based on Statistical Autocorrelation,Physica A, vol. 376, 2007, pp. 139-146.

EXTRA FILES

COMMENTS