DUAL MODALITY TOMOGRAPHY SYSTEM USING OPTICAL AND ELECTRODYNAMIC SENSORS FOR TOMOGRAPHIC IMAGING SOLID FLOW

Publications

Share / Export Citation / Email / Print / Text size:

International Journal on Smart Sensing and Intelligent Systems

Professor Subhas Chandra Mukhopadhyay

Exeley Inc. (New York)

Subject: Computational Science & Engineering , Engineering, Electrical & Electronic

GET ALERTS

eISSN: 1178-5608

DESCRIPTION

0
Reader(s)
0
Visit(s)
0
Comment(s)
0
Share(s)

VOLUME 3 , ISSUE 3 (September 2010) > List of articles

DUAL MODALITY TOMOGRAPHY SYSTEM USING OPTICAL AND ELECTRODYNAMIC SENSORS FOR TOMOGRAPHIC IMAGING SOLID FLOW

M. F. Rahmat * / S. Ibrahim * / M. M. Elmajri * / N. F. Mohammed * / M.D Isa *

Keywords : Dual modality, tomography, solid flow, optical sensors, electrodynamic sensors.

Citation Information : International Journal on Smart Sensing and Intelligent Systems. Volume 3, Issue 3, Pages 389-399, DOI: https://doi.org/10.21307/ijssis-2017-399

License : (CC BY-NC-ND 4.0)

Published Online: 13-December-2017

ARTICLE

ABSTRACT

Process tomography is a technique to realize flow imaging in a process vessel or pipeline by using the sensor system. This technique involves the use of tomographic imaging methods to manipulate data from sensors in order to collect sufficient information about the flow in the pipeline. The overall aim of this paper is to investigate the benefits of dual modality (optical and electrodynamic) tomography system for the measurement of tomographic images of solids flow. This research will investigate the distribution of conveying plastic beads in a conveying pipe by placing optical and electrodynamic sensors around the pipe without interrupting the flow inside the pipe.

Content not available PDF Share

FIGURES & TABLES

REFERENCES

[1] Beck, M. S. and Wiliams, R. A, "Process tomography: a European innovation and its aplications", Meas. Sci. Technol. Vol(7): 215–224, 1996.
[2] Abdul Rahim, R., Chiam, K.T., Jayasuman, P, "Embedded system based optical tomography: the concentration profile", Sensor Review Journal, Vol.29, No.1, pp. 54-62, 2009.
[3] Xu. H., Baidoo, K., Gunn, A.J., Boswell, A.C., Milenic, D.E., Choyke, P.L. and Brechbiel, M.W, "Design, Synthesis and Characterization of a Dual Modality Positron Emission Tomography and Fluorescence Imaging Agent for Monoclonal Antibody Tumor - Targeted Imaging", Journal Medical Chemical, Vol. 50, 4759-476, 2007.
[4] Abdul Rahim, R., Green R. G., Horbury, N ., Dickin, F. J., Naylor, B. D., and Pridmore, T. P, "Further development of a tomographic imaging system using optical fibres for pneumatic conveyors", Meas. Sci. Technol. Vol(7): 419-422, 1993.
[5] T. Dyakowski, G. A. Johansen, D. Sankowski, V. Mosorov, J. Wlodarczky, "A dual modality tomography system for imaging gas/solids flow", Proceeding 4th World Congress on Industrial Process Tomography, 2005.
[6] Kak, A. C. and Slaney, M. C. "Principle of Computerized Tomography Imaging", New York: IEEE Press. The Institute of Electrical and Electronics Engineers, Inc. 1999.
[7] Ibrahim, Sallehuddin and Green, Robert Garnett, "Optical tomography for imaging process flow", Proc. MSTC, Melaka, Malaysia, pp. 149-155, October 8th – 10th, 2001
[8] Sallehuddin bin Ibrahim, "Measurement of Gas Bubbles in a Vertical Water Column using Optical Tomography", Doctor Philosophy, Sheffield Hallam University, 2000.
[9] Ruzairi bin Abdul Rahim, "A Tomography Imaging System for Pneumatic Conveyors using Optical Fibers". Doctor Philosophy, Sheffield Hallam University, 1996.
[10] M. F. Rahmat and N.S. Kamaruddin, "An electrodynamic sensor for electrostatic charge measurement", International Journal on Smart Sensing and Intelligent Systems, vol. 2, no. 2, june 2009
[11] Xu, C., Zhang, J., Yang, D., Zhou, B., Tang, G., Wang, S. "Dense-phase pneumatically conveyed coal particle velocity measurement using electrostatic probes and cross correlation algorithm", pp012004, 2009.
[12] Green, R. G., Rahmat, M. F., Dutton, K., Evans, K., Goude, A. and Henry, M., "Velocity and Mass Flow Rate Profile of Dry Powders in a Gravity Drop Conveyer using an Electrodynamic Tomography System", Meas. Sci. Technol., Vol. 8, 429-436, 1997.
[13] M. F. Rahmat, N. S. Kamaruddin, and M. D. Isa, "Flow Regime Identification In Pneumatic Conveyor Using Electrodynamic Transducer and Fuzzy Logic Method", International Journal on Smart Sensing and Intelligent Systems, Vol. 2, No. 3, September 2009
[14] Deng, X., Dong, F., Xu, L. J., Liu, X. P. and Xu, L. A., "The Design of a Dual-Plane ERT System for Cross Correlation Measurement of Bubbly Gas/Liquid Pipe Flow". Measurement Science Technology., Vol. 12, 1024-1031, 2001.

EXTRA FILES

COMMENTS