BRIDGE DEFLECTION MEASUREMENT USING WIRELESS MEMS INCLINATION SENSOR SYSTEMS

Publications

Share / Export Citation / Email / Print / Text size:

International Journal on Smart Sensing and Intelligent Systems

Professor Subhas Chandra Mukhopadhyay

Exeley Inc. (New York)

Subject: Computational Science & Engineering , Engineering, Electrical & Electronic

GET ALERTS

eISSN: 1178-5608

DESCRIPTION

10
Reader(s)
26
Visit(s)
0
Comment(s)
0
Share(s)

VOLUME 6 , ISSUE 1 (February 2013) > List of articles

BRIDGE DEFLECTION MEASUREMENT USING WIRELESS MEMS INCLINATION SENSOR SYSTEMS

Yan Yu * / Hang Liu / Dongsheng Li * / Xingquan Mao / Jinping Ou

Keywords : wireless sensor networks, MEMS, deflection measurement, inclination, bridge

Citation Information : International Journal on Smart Sensing and Intelligent Systems. Volume 6, Issue 1, Pages 38-57, DOI: https://doi.org/10.21307/ijssis-2017-527

License : (CC BY-NC-ND 4.0)

Received Date : 17-September-2012 / Accepted: 10-January-2013 / Published Online: 20-February-2013

ARTICLE

ABSTRACT

Bridge is an important part of modern transportation systems and deflection is an important index for bridge’s safety evaluation. In this paper, a method of deflection measurement using Wireless MEMS Inclination Sensor Systems (WMISS) is presented and validated. Firstly, based on various bridge deflection measuring methods, the method of deflection measurement using inclination parameter is introduced. Secondly, a low-power wireless inclination sensor based on 3D-MEMS SCA60 inclinometer is designed using modularization way, and this kind of wireless sensor loaded with
ZigBee/IEEE 802.15.4 MAC protocol stack can self-organize wireless sensor network, measure the angle value and send the data to the coordinator. Then the deflection curve is displayed on PC. Finally, deflection measurement experiments are conducted on a bridge model and Beida Bridge. The experimental results show that, the presented deflection measurement method is feasible, practical and reliable; the wireless inclination sensor is easy to operate with no lines, and has extensive and broad application prospects.

Content not available PDF Share

FIGURES & TABLES

REFERENCES

[1] Spencer, B.F, “Opportunities and Challenges for Smart Sensing Technology”, First International Conference on Structural Health Monitoring and Intelligent Infrastructure, Japan, pp.65-71, 2003.
[2] Ou J. P. and Li H. W, “Wireless sensor information fusion for structural health monitoring”,SPIE, Vol.5099, pp. 356-362, 2003.
[3] Yan Yu and Jinping Ou, “Design, calibration and application of wireless sensors for structural global and local monitoring of civil infrastructures”, Smart Structures and Systems, Vol. 6, No. 5,pp.641-659, 2010.
[4] Shinae Jang, Hongki Jo, Soojin Cho, Kirill Mechitov, Jennifer A. Rice, Sung-Han Sim, Hyung-Jo Jung, Chung-Bang Yun, Billie F. Spencer, Jr. and Gul Agha , “Structural health monitoring of a cable-stayed bridge using smart sensor technology: deployment and evaluation”,Smart Structures and Systems, Vol. 6, No. 5,2010.
[5] Guirong Yan, Weijun Guo, Shirley Dyke and Chenyang Lu, “Experimental Validation of a Multi-level Damage Localization Technique with Distributed Computation”, Smart Structures and Systems, Vol. 6, No. 5, 2010.
[6] ZHU Y, “Online def lect ion monitoring syst em for Daf os i cable stayed bridge”, Journal of Int elligent Mat erial Syst ems and St ructures, Vol. 17, No. 8, pp. 701- 707,2006.
[7] Liu Niandong, “Research and application of laser deflection displacement measurement for bridge health monitoring system”, Dissertation for the degree of master of Chongqing University, China, 2001.
[8] Wong K Y, Man K L, Chan W Y, “Monitoring Hong Kong’s Bridges: Real-Time Kinematic Spans the Gap”, GPS World, 2001.
[9] Liu Guoping, “Research about low frequency dynamic characteristics of deflection testing system for LianTongGuan type bridge”, Dissertation for the degree of master of Chongqing University, China, 2007.
[10] Whiteman T, LichtiD D and Chandler I, “Measurement of Deflection in Concrete Beams by Close range Digital Photogrammetry”, Symposium on Geospatial Theory, Processing and Applications, Ottawa, Canada, pp.22-26, 2002.
[11] Yang Xueshan and Hou Xingmin, “A new method for bridge deflection measurement”, Journal of Civil Engineering, Vol. 35, No. 2, pp. 92-96, 2002.
[12] M. Shiraishi, H. Kumagai, H. Inada, Y. Okuhara and H. Matsubara, “The SHM System using Self-Diagnosis Material and Wireless Data Measurement Device”, Smart Structures and Materials 2005: Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, Proc. of SPIE, Vol. 5765,pp.187-194,2005.
[13] Glaser, S., H. Li, M. Wang, J. Ou and J. Lynch, "Sensor Technology Innovation for Advancement of Structural Health Monitoring: A Strategic Program Plan of US-China Research for the Next Decade," Smart Structures & Systems, Vol. 3, No. 2, March 2007, pp. 221-244.
[14] Spencer, B. F, “A study on building risk monitoring using wireless sensor network MICA mote”, First International Conference on Structural Health Monitoring and Intelligent Infrastructure, Japan,2003, pp. 353-363.
[15] Yan Yu and Jinping Ou, “Development of wireless MEMS inclination sensor system for swing monitoring of large scale hook structures”, IEEE Transactions on Industrial Electronics,Vol. 56, No. 4, 2009, pp.1072-1078.
[16] Yan Yu and Jinping Ou, “Design of wireless intelligent sensor for structural health monitoring”, IEEE Sensor Networks and Information Processing Conference, Dec 2004, pp.1-5.
[17] Elements of VTI ‘S 3D-MEMS, VTI Technology References, March, 2007, pp.1-4.
[18] http://www.vti.fi/midcom-serveattachmentguid-53b766f2850a127b88947edbf1de536f/SCA
61T_inclinometer_datasheet_8261900A.pdf
[19] IEEE 802.15.4 2006 Part 15.4, Wireless medium access control (MAC) and physical layer (PHY) specifications for low-rate wireless personal area networks (WPANs).
[20] Guo Zhihua, “Research of detection and maintainace project for Beida Bridge of Dalian City”, Dalian University of Technology, 2005.

EXTRA FILES

COMMENTS