SEARCH WITHIN CONTENT
Citation Information : International Journal on Smart Sensing and Intelligent Systems. Volume 6, Issue 4, Pages 1,599-1,616, DOI: https://doi.org/10.21307/ijssis-2017-606
License : (CC BY-NC-ND 4.0)
Received Date : 15-April-2013 / Accepted: 28-July-2013 / Published Online: 05-September-2013
This paper introduces the working principle of the two-stage decoupled micro-machined gyroscope, and establishes the vibration equation of the driving mode. By solving the differential equation, the analytical solution and the amplitude-frequency characteristics of the driving mode are obtained. By the visual measurement based on high-speed photography and the post image processing, it measures the natural frequency of the driving mode of the micro-machined gyroscope. And it measures the damping coefficient in time domain and frequency domain respectively using this method. The comparison to the theoretical solution proves that the method is effective and accurate; it will help the study for the micro-machined gyroscope vibration and provides a new way to measure MEMS.
 Zhu Zhen,Al-Mamun, A.; Naing, “Control-centric simulator for mechatronics design case study: gyroscopically stabilized single wheel robot”, International Journal on Smart Sensing and Intelligent Systems, Vol.2, no.2, 2009,pp.537-546.
 CHI Xiaozhu, Cui Jian, YAN Guizhen. “Electrical method to measure the dynamic behaviour of a MEMS gyroscope sensor”, Chinese Journal of Sensors and Actuators, Vol.21, no.4, 2008, pp.559-562.
 CHEN Weiping, CHEN Hong, GUO Yugang et al. “Doubly Decoupling Mechanism of a Fully Symmetrical Micromachined Gyroscope”, Nanotechnology and Precision Engineering, Vol.7, no.3, 2009, pp.239-244.
 GEIGER W, BUTT W, GAIBER A, et al. “Decoupled micro gyros and the design principle DAVED”, Sensors and Actuators, Vol. A, no.95, 2002, pp. 235-245.
 JIAN Ming, YANG Fu-jun, Dong E-liang et al. “Analysis of mechanical characteristics in the double linear vibratory gyroscope using high speed photography”, Optics and Precision Engineering, Vol.14, no.1, 2006, pp.121-126.
 Gao Shiqiao, liu Haipeng．“MEMS force” ．Beijing China：Defense press，pp. 160-168, 2008．
 Lin Ye, Mo Jin-qiu．“ Design and simulation of a new double decoupled micro machined gyroscope”, Computer Simulation, Vol.22, no.4, 2005, pp. 20-24.
 Chakraborty, Subha．“Development and characterization of surface micro-machined mems based varactor”, Vol.3, no.1, 2010, pp. 94-107.
 Wen Bangchun, Liu Shuyin, Chen Zhaobo et al. “Theory of mechanical vibration and its applications”．Beijing：Higher education press,2009,pp. 16-62.
 Yin Xiangchao．“ Theory of vibration and Testing technology”, Xuzhou：China University of mining and technology press, 2007, pp. 220-224.
Yao Fenglin, Gao Shiqiao. “Dynamic test of vibration for micro machined gyroscope based on high speed photography”. Optics and Precision Engineering, Vol.20, no.1, 2012, pp.165-171.
Jin Cuiyun, Li Dachao, et al. . “Measurement Technique of In-plane Motion for MEMS Based on Machine Micro-vision”, Chinese journal of scientific instrument, Vol.26, no.8, 2005, pp. 772-774
Jiang Ming, He Xiaoyuan. “Optical testing of dynamic characteristic of vibrating wheel micromechanical gyroscope”, Optics and Precision Engineering, Vol.16, no. 2, 2008, pp. 295-299.
Lee, Sang Rok. “A coarse-to-fine approach for remote-sensing image registration based on a local method” ,international Journal on Smart Sensing and Intelligent Systems, Vol. 3, no.4,2010, pp. 690-702.
 Rimminen, H. “Positioning accuracy and multi-target separation with a human tracking system using near field imaging”, International Journal on Smart Sensing and Intelligent Systems,
Vol. 2, no.1, 2009, pp. 156-75.
 Jayakumar, T. “Sensors for monitoring components, systems and processes”, International Journal on Smart Sensing and Intelligent Systems, Vol. 3, no.1, 2010, pp. 61-74
 Otsu, N., “A threshold selection method from gray-level histograms”, IEEE Transactions on Systems, Man, and Cybernetics Vol. 9, no.1, 1979, pp. 62-66
Yao Fenglin, Gao Shiqiao. “Vibration test of micro machined gyroscope based on high speed photography and SURF”, Journal of Beijing Institute of Technology，Vol.21, no.2, 2012, pp.179-184.
Wei juanli, ,Zhai Sheping,Wang Wancheng. “Arch for detecting and tracking of human motion target in video-based sequences”,Computer application and software, Vol.23, no.4,2006, pp. 139-141.
Ming-kuei Hu. “Visual Pattern Recognition by Moment Invariants”, ROC IRE(Correspondence) Transaction on information theroy, Vol.49, no.1,1962, pp. 179-187.
Liu Xijun, Jia Qifeng. “Theory of engineering vibration and testing technology”,Beijing：Higher education press, 2004, pp.390-420.
Ni Zhenhua, “Vibration mechanics”,Xi’an : Xi’an jiaotong press,1989, pp. 64-65
Liu Xijun,Jia Qifeng, “Theory of engineering vibration and testing technology”, Beijing:Higer education press, 2004, pp. 390-420．