AN ADAPTIVE CHANNEL HOPPING ALGORITHM FOR WIRELESS SENSOR NETWORK WITH MESH STRUCTURE

Publications

Share / Export Citation / Email / Print / Text size:

International Journal on Smart Sensing and Intelligent Systems

Professor Subhas Chandra Mukhopadhyay

Exeley Inc. (New York)

Subject: Computational Science & Engineering, Engineering, Electrical & Electronic

GET ALERTS

eISSN: 1178-5608

DESCRIPTION

3
Reader(s)
16
Visit(s)
0
Comment(s)
0
Share(s)

VOLUME 6 , ISSUE 4 (September 2013) > List of articles

AN ADAPTIVE CHANNEL HOPPING ALGORITHM FOR WIRELESS SENSOR NETWORK WITH MESH STRUCTURE

Zhao Jindong * / Fan Baode / Lu Yunhong / Mu Chunxiao

Keywords : Wireless Sensor Network, multi-channel communication, Adaptive Channel Hopping, IEEE802.15.4, Wireless Mesh Net

Citation Information : International Journal on Smart Sensing and Intelligent Systems. Volume 6, Issue 4, Pages 0-0, DOI: https://doi.org/10.21307/ijssis-2017-607

License : (CC BY-NC-ND 4.0)

Received Date : 31-March-2013 / Accepted: 12-July-2013 / Published Online: 05-September-2013

ARTICLE

ABSTRACT

According to EGTS proposal, an adaptive channel hopping algorithm that can be used in wireless mesh sensor networks was is designed in this paper. The nodes select proper channels independently and use them to communicate with their neighbors. Once a pair of nodes find their current channel has been deteriorated, they abandoned the current channel and enable the reserved channel, so that the reliability of the network is improved. The algorithm is compatible with the primitives and the frame structure of EGTS and makes use of multi-channels efficiently. The data structure and the procedure of the mechanism were described in detail and the feasibility and the efficiency was given by analysis and experiment. Finally, it is concluded that the algorithm is practicable when the density of network is less than 8 and the topology is relatively static.

Content not available PDF Share

FIGURES & TABLES

REFERENCES

[1] “ISA SP100”, ISA SP100 Society, (http://www.isa.org/MSTemplate.cfm? MicrositeID=1134&CommitteeID=6891), 2009.
[2] “HART Communication Foundation”, Wireless HART, (http://www.hartcomm2.org/ hart-protocolIIwireless-hart/wireless-hart-main. Html), 2008.
[3] Wireless Industry Automation Specification for Porocess Automation. IEC pass/62601[S]. 2008
[4] “Wireless Personal Area Networks: Proposal for Factory Automation”, IEEE Proposed Standard 802.15.4-15( http://www.ieee802.org/15/pub/TG4e.html), 2009.
[5] Shen Lianfeng, Zou le,Song Yang, Song Tiecheng, “A High-speed AFH Scheme and Its Performance Analysis in WPAN Systems”, ACTA ELECTRONICA SINICA , vol.30, no.10, pp. 287–291,2002
[6] Deng Tianle, Zhu Xuetian, Zhou Zheng, “Realization of Smart FH Multiple Access Scheme for WPAN”, Radio Engineering of China, vol.34, no.12,pp.5-8, 2004.
[7] Wang Qin, Wan Yadong, Li Lei, Dun Shihong, “Analyzing and Modeling the Reliability of the Multi-channel of IEEE802.15.4 link in Industrial Environment”. Journal of Computer Research and Development, vol. 46, no.12, pp.1971-1984, 2009.
[8] Wan Yadong, Wang Qin, Duan Shihong, et al, “RAFH: Reliable Aware Adaptive Frequency Hopping Method for Industrial Wireless Sensor Networks”, Proceedings of the 5th International Conference on Wireless communications, networking and mobile computing. Beijing, pp.125-129, Sept 24-26, 2009.
[9] Hsu ACC,Wei DSL, Kuo CCJ, Shiratori N, Chang CJ, “Enhanced Adaptive Frequency Hopping for Wireless Personal Area Networks in a Coexistence Environment”, Proc. of IEEE GLOBECOM, Washington, DC, pp.668-672, Nov 26-30, 2007.
[10] Bamahdi O, Zummo S, “An adaptive frequency hopping technique with application to Bluetooth WLAN coexistence”, Proceedings of IEEE wireless communications. Washington, DC, USA, pp.131, 23-29 April 2006.
[11] Djukic P., Valaee S., “Link Scheduling for Minimum Delay in Spatial Re-Use TDMA”, 26th IEEE International Conference on Computer Communications, NJ, USA, pp. 28–36, May 6-12, 2007.
[12]Zhao Jindong,Wang Qin,Yu Feng, “Route-based Scheduling in Wireless Multi-hop Mesh Networks for Collision Avoidance”, Proceedings of the 5th International Conference on Wireless communications, networking and mobile computing, Beijing, pp.1-4, Sept 24-26, 2009.
[13]M. Salajegheh, et al., “HYMAC: Hybrid TDMA/FDMA medium access control protocol for wireless sensor networks”, In IEEE International Symposium on Personal, Indoor and Mobile Radio Communications, pp. 1-5, Athens, Sept 3-7, 2007.
[14]G. Zhou, et al., “A multifrequency MAC specially designed for wireless sensor network applications”, Transactions on Embedded Computing Systems , vol. 9, no. 4, pp. 1-41, 2010.
[15]O. D. Incel, et al., “MC-LMAC: a multi-channel MAC protocol for wireless sensor networks”, Ad Hoc Networks, vol. 9, no. 1, pp. 73-94, 2011.
[16]L. F. W. van Hoesel, “Sensors on speaking terms: Schedule-based medium access control protocols for wireless sensor networks”, Doctor of Engineering thesis, Faculty of Electrical Engineering, University of Twente, Enschede, the Netherlands, 2007.
[17]Mo Sha, Gregory Hackmann, Chenyang Lu, “ARCH: Practical Channel Hopping for Reliable Home-Area Sensor Networks”, Proceeding of IEEE 17th Real-Time and Embedded Technology and Applications Symposium, Chicago, IL, pp.305-315, April 11-14, 2011.
[18]Toscano, E, “Multichannel Superframe Scheduling for IEEE 802.15.4 Industrial Wireless Sensor Networks”, IEEE Trans. Industrial Informatics, vol 8, no2, 2012, pp.337-350.
[19]G. Anastasi, M. Conti, M. Di Francesco, “A Comprehensive Analysis of the MAC Unreliability Problem in IEEE 802.15.4 Wireless Sensor Networks”, IEEE Trans. on Ind. Information, vol 7, no 1, 2011, pp.52-65.
[20]A. Saifullah, You Xu, Chenyang Lu, and Yixin Chen, “Real-Time Scheduling for WirelessHART Networks”, Proceeding of 31st IEEE Real-Time Systems Symposium (RTSS), pp. 150 - 159 ,San Diego, CA ,Nov. 30 2010-Dec. 3, 2010.
[21]Suk-Un Yoon, Robert Murawski, Eylem Ekici, “Adaptive Channel Hopping for Interference Robust Wireless Sensor Networks”, Proceeding of IEEE ICC 2010, pp.1-5, Cape Town, South Africa, May 23-27, 2010.

EXTRA FILES

COMMENTS