MEASUREMENT AND ANALYSIS OF HIGH TEMPERATURE USING DISTRIBUTED FIBER OPTIC SENSOR

Publications

Share / Export Citation / Email / Print / Text size:

International Journal on Smart Sensing and Intelligent Systems

Professor Subhas Chandra Mukhopadhyay

Exeley Inc. (New York)

Subject: Computational Science & Engineering , Engineering, Electrical & Electronic

GET ALERTS

eISSN: 1178-5608

DESCRIPTION

4
Reader(s)
6
Visit(s)
0
Comment(s)
0
Share(s)

VOLUME 7 , ISSUE 4 (December 2014) > List of articles

MEASUREMENT AND ANALYSIS OF HIGH TEMPERATURE USING DISTRIBUTED FIBER OPTIC SENSOR

Yongjiao Wang * / Bin Yang / Lei Liang

Keywords : Fiber optic, Sensor, Digital signal processing, Temperature control.

Citation Information : International Journal on Smart Sensing and Intelligent Systems. Volume 7, Issue 4, Pages 1,595-1,612, DOI: https://doi.org/10.21307/ijssis-2017-722

License : (CC BY-NC-ND 4.0)

Received Date : 15-July-2014 / Accepted: 30-October-2014 / Published Online: 01-December-2014

ARTICLE

ABSTRACT

In this paper the working principle and application status of distributed optical fiber
temperature sensor, amplified spontaneous Raman scattering phenomenon and its time-domain
characteristics are analyzed. A new measuring principle based on amplified spontaneous Raman
scattering light pulse signal temperature effect is presented, and is applied to distributed optical fiber
sensor systems. Noise inevitably exists in data collected by distributed optical fiber temperature sensing
systems. According to the needs of high-temperature oil well testing, distributed high temperature
single-mode fiber sensors and detection equipment are designed, and gives two-dimensional data of oil
well temperature testing. Because of the weak Raman backwards scattered signal and serious noise
disturbance, multi-resolution wavelet analysis and reconstruction method are adopted for the denoising
of testing signal.

Content not available PDF Share

FIGURES & TABLES

REFERENCES

[1] Nath, D.K., Sugianto, R., Finley, D., Fiber-optic distributed-temperature-sensing technology,
2006 SPE/IADC INDIAN Drilling Technology Conference and Exhibition, pp.9-18, 2006.
[2] J.P.Dakin, Distributed fiber-optic sensor system, Optoelectronics Research Centre, pp. 377-
385.
[3] Juarez, J.C et al., Distributed fiber-optic intrusion sensor system, Journal of Lightwave
Technology, vol.23, no.6, pp.2081 - 2087, 2005.
[4] Ma X, Chang J, Wang L, et al. Using Multiple Reference Points in Raman Based Distributed
Temperature Sensor for Eliminating DC Interference, Sensors Journal, vol.14, no.1, pp. 295 - 301,
2014.
[5] Yonghao Xu, Xianfeng Chen,and Yu Zhu, High Sensitive Temperature Sensor Using a
Liquid-core Optical Fiber with Small Refractive Index Difference Between Core and Cladding
Materials, Sensors , vol.8, no.3, pp.1872–1878, 2008.
[6] Minakuchi, S.; Takeda, N.; Takeda, S.-I.; Nagao, Y.; Franceschetti, A.; Liu, X. Life cycle
monitoring of large-scale CFRP VARTM structure by fiber-optic-based distributed sensing.
Compos. Part A 2011, 42, 669–676.
[7] López-López M, García-Ruiz C. Infrared and Raman spectroscopy techniques applied to
identification of explosives. TrAC Trends in Analytical Chemistry, 2014, 54: 36-44.
[8] Xu, M.G.; Archambault, J.-L.; Reekie, L.; Dakin J.P. Discrimination between strain and
temperature effects using dual-wavelength fibre grating sensors. Electron. Lett. 1994, 30, 1085–
1087.
[9] Damien Kinet et al., Fiber Bragg Grating Sensors toward Structural Health Monitoring in
Composite Materials: Challenges and Solutions, Sensors, vol.14, pp.7394-7419, 2014.
[10] Kodriano Y, Schmidgall E R, Benny Y, et al. Optical control of single excitons in
semiconductor quantum dots. Semiconductor Science and Technology, 2014, 29(5): 053001.
[11] Vo T D, He J, Magi E, et al. Chalcogenide fiber-based distributed temperature sensor with
sub-centimeter spatial resolution and enhanced accuracy. Optics Express, 2014, 22(2): 1560-1568.
[12] Saxena M K, Raju S, Arya R, et al. Optical fiber distributed temperature sensor using short
term Fourier transform based simplified signal processing of Raman signals. Measurement, 2014,
47: 345-355.
[13] Challener W A. Multiparameter fiber optic sensing system for monitoring enhanced
geothermal systems. General Electric Global Research, 2014.
[14] Kersey A D. A review of recent developments in fiber optic sensor technology. Optical fiber
technology, 1996, 2(3): 291-317.
[15] He J, Zhou Z, Ou J. Simultaneous measurement of strain and temperature using a hybrid
local and distributed optical fiber sensing system. Measurement, 47: 698-706, 2014.
[16] Podrouzek J, Bucher C, Deodatis G. Identification of critical samples of stochastic processes
towards feasible structural reliability applications. Structural Safety, 2014, 47: 39-47.
[17] S.C.Mukhopadhyay and S.K.Pal, "Temperature Analysis of Induction Motors Using a
Hybrid Thermal Model with Distributed Heat Sources", Journal of Applied Physics, June 1998,
Vol 83, No. 1, pp 6368-6370.
[18] A. Mason, S. Wylie et al.., flexible e-textile sensors for real-time health monitoring at
microwave frequencies, International Journal on Smart Sensing and Intelligent Systems, vol. 7,
no. 1, pp. 31 – 47, 2014.
[19] Jianping He, Zhi Zhou, Jinping Ou, Simultaneous measurement of strain and temperature
using a hybrid local and distributed optical fiber sensing system, Measurement, vol.47, pp.698–
706,2014.
[20] Gabriele Bologninia, Arthur Hartogb, Raman-based fibre sensors: Trends and applications,
Optical Fiber Technology, vol.19, no.6, pp.678–688, 2013.

EXTRA FILES

COMMENTS