INTELLIGENT NEURAL NETWORK CONTROL STRATEGY OF HYDRAULIC SYSTEM DRIVEN BY SERVO MOTOR

Publications

Share / Export Citation / Email / Print / Text size:

International Journal on Smart Sensing and Intelligent Systems

Professor Subhas Chandra Mukhopadhyay

Exeley Inc. (New York)

Subject: Computational Science & Engineering, Engineering, Electrical & Electronic

GET ALERTS

eISSN: 1178-5608

DESCRIPTION

14
Reader(s)
35
Visit(s)
0
Comment(s)
0
Share(s)

VOLUME 8 , ISSUE 2 (June 2015) > List of articles

INTELLIGENT NEURAL NETWORK CONTROL STRATEGY OF HYDRAULIC SYSTEM DRIVEN BY SERVO MOTOR

Correspondence
mayu-97@163.com '> Ma Yu *

Keywords : particle swarm optimization, Intelligent Neural Network, hydraulic system, PID

Citation Information : International Journal on Smart Sensing and Intelligent Systems. Volume 8, Issue 2, Pages 1,406-1,423, DOI: https://doi.org/10.21307/ijssis-2017-812

License : (CC BY-NC-ND 4.0)

Received Date : 21-February-2015 / Accepted: 05-May-2015 / Published Online: 01-June-2015

ARTICLE

ABSTRACT

A novel intelligent neural network control scheme which integrates the merits of fuzzy inference, neural network adaptivity and simple PID method is presented in this paper. This control method overcomes the defects existed in the traditional variable frequency induction motor driven hydraulic source, such as slow response, poor control precision, easy to overshoot. Permanent magnet synchronous motor driven constant pump hydraulic system is designed instead of common motor, energy saving, fast response and easy to realize closed loop control. System uses the structure of the combination of neural network control and RBF network online identification. The parameters of the controller are optimized by PSO algorithm offline and error back propagation (BP) algorithm offline, and a RBF network is built to identify the system online. The hydraulic power system’s control simulation experiments are conducted, and the experimental results at the typical working conditions of the hydraulic source show that the controller and its optimization algorithm can effectively improve the system performance, and the system has no steady-state error, good dynamic performance and good robustness, superior to conventional fuzzy controller and PID controller.

Content not available PDF Share

FIGURES & TABLES

REFERENCES

[1] Otto Cerman and Petr Hušek, “Adaptive fuzzy sliding mode control for electro-hydraulic
servo mechanism”, Expert Systems with Applications 39 (2012) ,pp.10269–10277.
[2] R. Ahmed, O. Abdul, C. Marcel, dSPACE DSP-based rapid prototyping of fuzzy PID
controls for high performance brushless servo drives, in: Proceedings of IEEE International
Conference, USA, 2006, pp. 1360–1364.
[3] Truong DQ, Ahn KK, Soo KJ, Soo YH. Application of fuzzy-PID controller in hydraulic
load simulator. In: Proceedings of the IEEE international conference on mechatronics and
automation, 2007. pp. 3338–43.
[4] Dinh Quang Truong and Kyoung Kwan Ahn, “Force control for hydraulic load simulator
using self-tuning grey predictor – fuzzy PID”, Mechatronics 19 (2009), pp .233–246.
[5] Zulfatman and M. F. Rahmat, “ Application of self-tuning Fuzzy PID Controller on
Industrial Hydraulic Actuator using System Identification Approach”, International Journal on
Smart Sensing and Intelligent Systems, Vol. 2, No. 2, pp 246-261,June 2009.
[6] Jin lisheng, Zhao Dingxuan and Huang haidong, “Study on Energy-saving Intelligent PID Expert Control System of Hydraulic Excavators”, Natural Science Journal of Jilin University
of Technology, Vol.31, No.4, 2001,pp.12-16.
[7] T. Radpukdee and P. Jirawattana, “Uncertainty learning and compensation: An application
to pressure tracking of an electro-hydraulic proportional relief valve”, Control Engineering
Practice 17 (2009), pp. 291–301.
[8] Shengdun Zhao, Ji Wang, Lihong Wang, Chunjian Hua and Yupeng He, “Iterative
learning control of electro-hydraulic proportional feeding system in slotting machine for
metal bar cropping” , International Journal of Machine Tools & Manufacture 45 (2005),
pp.923–931.
[9] Huang X, Liting S. Simulation on a fuzzy-PID position controller on the CNC servo
system. In: Proceedings of the IEEE 6th international conference on intelligent systems
design and applications; 2006. p. 305–9.
[10] Ergin Kilic, Melik Dolen, Hakan Caliskan, Ahmet Bugra Koku and Tuna Balkan,
“Pressure prediction on a variable-speed pump controlled hydraulic system using structured
recurrent neural networks”, Control Engineering Practice 26 (2014),pp. 51–71.
[11] M. Hasebe, Y. Nagayama, “Reservoir operation using the neural network and fuzzy
systems for dam control and operation support”, Advances in Engineering Software 33
(2002),pp.245-260.
[12] IshigarniH,FukudaT,ShibataT,etal, “Struture optimization of fuzzy Neural network
by genetic algorithm”, Fuzzy Sets and Systems, Vol. 71, No. 3, 1995, pp. 257-264.
[13] S.C.Mukhopadhyay, T.Ohji, M.Iwahara and S.Yamada, "Design, Analysis and Control
of a New Repulsive Type Magnetic Bearing", IEE proceeding on Electric Power
Applications, vol. 146, no. 1, pp. 33-40, January 1999.
[14] K.K. Ahn, D.Q. Truong, “Online tuning fuzzy PID controller using robust extended
Kalman filter”, Journal of Process Control 19 (2009), pp. 1011–1023.
[15] D. Josephine Selvarani Ruth, S Sunjai Nakshatharan and K Dhanalakshmi, “Auto-
Adaptive Control of a One-Joint Arm Direct Driven by Antagonistic Shape Memory alloy”,
International Journal on Smart Sensing and Intelligent Systems, Vol. 6, No. 3, pp833-849,
JUNE 2013.
[16] Guofu Tian, Shuhui Sun and Zhongwei Ren, “Application of Neural-Fuzzy System in Twin-Turbo Hydraulic Torque Converter’s Performance Testing”, Procedia Engineering 15
(2011),pp. 1282 – 1287.
[17] Y.M. Zhao, W.F. Xie, X.W. Tu, “Performance-based parameter tuning method of modeldriven
PID control systems”, ISA Transactions 51 (2012),pp. 393–399.
[18] Leszek Kasprzyczak, Ewald Macha, “Selection of settings of the PID controller by
automatic tuning at the control system of the hydraulic fatigue stand”, Mechanical Systems
and Signal Processing 22 (2008),pp. 1274–1288.
[19] G. Sen Gupta, S.C. Mukhopadhyay, S. Demidenko and C.H. Messom, “Master-slave
Control of a Teleoperated Anthropomorphic Robotic Arm with Gripping Force Sensing”,
IEEE Transactions on Instrumentation and Measurement, Vol. 55, No. 6, pp. 2136-2145,
December 2006.
[20]Yang Geng, “ Motor and motion control systems”, Tsinghua University Press, 2006.
[21] S.C.Mukhopadhyay, T.Ohji, M.Iwahara and S.Yamada, "Modeling and Control of a
New Horizontal Shaft Hybrid Type Magnetic Bearing", IEEE Transactions on Industrial
Electronics, Vol. 47, No. 1, pp. 100-108, February 2000.
[22] Xu lina , “Neural Network Control” , Electronic Industry Press, 2009.
[23]Wang Ling, “Intelligent optimization and its application”, Tsinghua University Press,
2001.

EXTRA FILES

COMMENTS