SEARCH WITHIN CONTENT
Citation Information : International Journal on Smart Sensing and Intelligent Systems. Volume 9, Issue 2, Pages 491-508, DOI: https://doi.org/10.21307/ijssis-2017-880
License : (CC BY-NC-ND 4.0)
Received Date : 05-January-2016 / Accepted: 12-April-2016 / Published Online: 01-June-2016
Virtual Instrument technology, based on DataSocket, is the product combined with computer technology, network communication technology and instrumentation technology. The paper has described some concepts about virtual instrument and LabVIEW. Now concerning the characteristic of equipment in grassroots units that equipment have diverse models and could be widespread distributed, and it could cause increasing difficulty of repair and maintenance about equipment. Thus, the paper proposed Virtual Instrument technology based on DataSocket and its application in equipment remote condition monitoring and fault diagnosis. DataSocket’s properties, structure and working principle were analyzed at the same time. By developing a set of equipment remote status monitoring and fault diagnosis system, the paper has tried to verify that the use of this technology can monitor real-time data and fault diagnosis.
 LiFengbao, LiLing, WangXiaodong. Networked Measurement and Control System Based on Virtual Instrument [J]. Scientific Instrument, 2004, 25(4): 295-297
 ChenGuoshun, Yuhanwei. Test Engineering and LabVIEW Applications [J]. 2013.
 MoHuifang, Raominghui. Motor Audio Remote Fault Diagnosis System Based on DataSocket Technology [J]. Automation and Instrumentation, 2013 (3): 175-176.
DataSocket Transfer Protocol Overview.Http://www.ni.com.
 JiangWei, ZhangXiaobo, LaiQinggui. Instrument Communication Technology Based on LabVIEW [J]. Computer Measurement & Control, 2013, 21(4): 1030-1032.
 WangJiping, ZhaoZhe, TianKechun. Communication Measurement Technology Based on LabVIEW [J]. Automation and Instrumentation, 2011, 26(1): 29-31.
Yan He and Benxian Xiao, “Research of The Forklift Power-Assisted Steering System Based
on Safety Steering Speed Control” International Journal On Smart Sensing and Intelligent
Systems. vol. 8, no. 1, March 2015 . . J. H. Liu, Y. F. Chen, T. S. Lin, C. P. Chen, P. T. Chen, T.H. Wen, C. H. Sun, J. Y.
Juang2, and J. A. Jiang, “ An air Quality Monitoring System for Urban Areas based on the
Technology of Wireless Sensor Networks,” International Journal on Smart Sensing and
Intelligent Systems, vol. 5, no. 1, march 2012 page 192-217. . N. Samanta, A. K. Chanda, C. RoyChaudhuri , “An Energy Efficient, Minimally Intrusive
Multi-Sensor Intelligent System for Health Monitoring of Elderly People,” International Journal
on Smart Sensing and Intelligent Systems vol. 7, no. 2, June 2014, page no 762-780. . J. Yang, W. Chen, Z. Fu, W. Wu, and Z. Xie,” Research of Multi Sensor Intelligent System
Signal Fusion and Reconstruction,” International Journal on Smart Sensing and Intelligent
Systems, vol. 7, no. 4, December 2014 page 1701-1716.
WangLin,ZhengZhengqi, Design of radar ranging data transmission system based on DataSocket[J], Electronic Measurement Technology, 2011.34(1):99-101
Bai JinPeng, The speed research of transferring images through DataSocket[J], Electronic Measurement Technology, 2015.38(12):49-53
 Chen Zheng, WangYing, Asynchronous motor test system based on LabVIEW and OPC[J], Industrial Communication,2015.10:68-71
 ZhangFeng, WangYu, Remote data acquisition system based on C/S Mode in the LabVIEW environment, Industrial & Science Tribune,2014(7)  XuJie, Chencheng,ZhaoGuowei. Design of Remote Data Acquisition System Based on LabVIEW[J], Microcomputer Information 2007(28):62-63.
 XU Fuxin , LUO Ming, CHEN Fang, HE Jishan, Design and Implementation of Video Acquisition in a Remote Measurement and Control System Based on LabVIEW[J], Computer Engineering & Science, 2009, 31(5):24-26.
 Yao Juan,Zhang Zhijie,Li Lifang, Data Acquisition System Design and Implementation based on LabVIEW and TCP[J], Application of Electronic Technique, 2012(7):72-74.
 ZHANG Zhi-jun,XU Xiao-li,WU Guo-xin, Wireless data technology Acquisition System based on LabVIEW and Wi-Fi [J]. Control and Instruments in Chemical Industry, 2013, 40(3):367-371.
 LI Ning, YUE Weiwei, Implement remote control technology based on LabVIEW [J], Equipment Manufacturing Technology, 2014(11):250-251.  Jiang Chaoyang, Zhu Chen. Virtual Instrument applies in Equipment Remote Monitoring and Fault Diagnosis Based on DataSocket Technology [J]. Digital Technology & Application, 2012(5):63-64.