Research Article
The paper presents a construction of an experimental electric bicycle for evaluation of the energy efficiency. The bicycle is equipped with onboard computer which can store the information about motion and energy consumption. The result concerning power, energy consumption, recharging during brake process, etc. are given. Energy consumption for 3 typical city routes is studied.
Ivan EVTIMOV,
Rosen IVANOV,
Gergana STANEVA,
Georgi KADIKYANOV
Transport Problems , ISSUE 3, 131–140
research-article
1.
INTRODUCTION
It is already clear today that better overall efficiency of future energy systems can be significant if the use of renewable energy sources increases. The introduction of photovoltaic elements into modern architecture is the result of an understanding of the need to use renewable energy sources, in this case solar energy, in order to implement sustainable development principles. In terms of architecture, it is this technology, which marks its presence in the façade or on the
Joanna BIEDROŃSKA
Architecture, Civil Engineering, Environment , ISSUE 3, 5–12
Article
With the application of wireless sensor networks become widespread, supply energy for these wireless sensors proves to be a significant issue. Moreover, for the ambient vibration lies everywhere, the vibration can supply energy for the wireless sensor via energy harvester. The piezoelectric energy harvester becomes the research focus for the simple structure and higher energy conversion efficiency. Due to the transcendental equation in distributed parameter model, the numerical method is become
Yao Fenglin,
Meng Wengjun,
Zhao Jie,
Yin Hang
International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 2018–2041
research-article
1.
INTRODUCTION
The mechanisms promoting energy efficiency in Poland were initiated by the introduction of the Act of April 15, 2011 on energy efficiency [1], as amended by introducing a new the Act of May 20, 2016 on energy efficiency [2]. Pursuant to these regulations, an entrepreneur who has implemented /plans to implement an undertaking or undertakings of the same type aimed at improvement, obtained the possibility to apply for an energy efficiency certificate, the so-called “White
Barbara HAWRYLAK
Architecture, Civil Engineering, Environment , ISSUE 4, 85–92
Article
This report introduces the study results of a Citroen Berlingo converted into an electric car. It presents the energy properties of road and laboratory tests. Initially the structure of the converted car is described, and characteristics of the main car elements are given. Then, the power and energy characteristics of the converted car are obtained and analyzed. On the road, energy consumption at different constant speeds is registered. In addition, at laboratory, the energy consumption during
Rosen IVANOV,
Milen SAPUNDZHIEV,
Georgi KADIKYANOV,
Gergana STANEVA
Transport Problems , ISSUE 3, 151–161
Research Article
It has been shown that road geometry has a great impact on overall energy consumption and emissions. Some roads connect traffic origins and destinations directly. On the other hand, some use winding, indirect routes. Indirect connections result in longer distances driven and increased fuel consumption. A similar effect is observed on congested roads and mountain roads with many changes in altitude. Therefore, we propose a framework to assess road networks based on energy consumption. This
Blaž LUIN,
Stojan PETELIN
Transport Problems , ISSUE 2, 77–87
Article
India is the world’s third largest consumer of primary energy, which includes fossil fuels like coal, oil, etc. The total primary energy consumption in India in 2015 was 107 Mtoe. India’s total final energy consumption was estimated at 527 Mtoe of which the industrial sectors consumed about 30% (185 Mtoe) in 2013. The Iron and Steel sector is one of the most energy-intensive industries, consuming about 25% of the total industrial energy consumption. The energy consumption in Indian
Anukriti Sharma,
Hiranmoy Roy,
Narendra Nath Dalei
Statistics in Transition New Series , ISSUE 2, 107–121
Article
The purpose of this paper is to describe and analyse a mechanical device designed to enhance the safety of a motor vehicle. The topic is addressed by analysing the method of absorbing kinetic energy during a car collision with an obstacle. The article analyses opportunities to convert motor vehicle’s kinetic energy into another type of energy in the case of collision. For this purpose, various mechanical, hydraulic or pneumatic devices are normally used. Such devices are designed to
Marijonas BOGDEVIČIUS,
Rolandas VITKŪNAS
Transport Problems , ISSUE 2, 5–17
research-article
, the knowledge of urban planners today has to be extended to the living environment ecology: the reduction of the negative impact of buildings on the environment, protection of natural resources, adaptation of the layout of buildings to the topography of the terrain, adjustment of technical infrastructure to the use of renewable energy sources in order to save energy and water. Considering that the most frequently mentioned features of sustainable design are energy efficiency and the use of
Joanna BIEDROŃSKA
Architecture, Civil Engineering, Environment , ISSUE 1, 15–22
Article
Public utility buildings are formally, structurally and functionally complex entities. Frequently the process of their design involves retroactive reconsideration of energy engineering issues, once a building concept has already been completed. At that stage minor formal corrections are made along with the design of the external layer of the building, satisfying or even exceeding applicable standards. Architecture students do the same when designing assigned public utility buildings. It can be
Marek A. WOŁOSZYN
Architecture, Civil Engineering, Environment , ISSUE 2, 37–43
research-article
1.
INTRODUCTION
Sustainable development of society implies the greening of the industrial process in solving the problem of preserving the natural environment. The introduction of biogas technologies allows reducing waste and increasing production intensification by utilizing organic waste, to maintain ecosystem balance. This is achieved through the production of gaseous energy and high quality organic fertilizers to maintain soil fertility. The clean power of solar, wind and bioelectric power
Georgiy RATUSHNIAK,
Yuriy BIKS,
Olena LYALYUK,
Olga RATUSHNYAK,
Andriy LYALYUK
Architecture, Civil Engineering, Environment , ISSUE 4, 115–124
Article
Mass consumption of energy is a big problem. Energy-saving activities which are a solution to this problem have been attracting a lot of attention. Nevertheless, in order to engage in thorough energy-saving activities, consumers need support; on the other hand, even with support, the effects seem to be only temporary. In this paper, to obtain a long-term effect, we focus on developing a method to raise consumers' awareness about energy-saving behavior. To this end, we designed an interface
Yasutaka Kishi,
Kyoko Ito,
Shogo Nishida
International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 1850–1869
research-article
1.
INTRODUCTION
The global trend of organic materials application for the construction low rise residential accommodation in the context of the sustainable development concept results in growing interest towards the usage of both known natural materials and their combinations as well as the search of new technological decisions. The trend of eco-buildings is starting to play an important role. The concept of eco-buildings means construction of low-energy buildings [1] that cause less harm to
Yuriy BIKS,
Georgiy RATUSHNYAK,
Olga RATUSHNYAK
Architecture, Civil Engineering, Environment , ISSUE 3, 55–67
Article
Resources of geothermal energy range from the shallow ground to hot water and hot rock were found a few kilometres beneath the Earth's surface, and down even deeper to the extremely high temperatures of molten rock called magma. The paper shows the analysis of the public building foundation with the usage of shallow geothermal system (closed loop systems using the vertical energy piles). In the soil and groundwater conditions the change of the way of public building foundation was suggested
Małgorzata JASTRZĘBSKA,
Barbara WAWRZYŃCZYK
Architecture, Civil Engineering, Environment , ISSUE 2, 65–76
Article
Wireless sensor networks (WSN) have limited lifetime due to on board battery. The lifetime can be improved by energy harvesting solutions. In this paper the solar energy harvester requirements for TelosB mote has been analyzed and calculated. Photovoltaic (PV) panel and battery sizing requirements are calculated by assuming that the mote follows SMAC and TDMA-MAC schedule for image communication. The calculations are validated by comparing it with the parameters calculated from the real time
R. Hemalatha,
R. Ramaprabha,
S. Radha
International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 291–315
Research Article
We discuss five scaling-related issues in robotics and robotic systems. They are unified by an understanding of the fundamental engineering constraints imposed by the essentially fixed fundamental strength of materials and the essentially fixed practical density at which energy can be stored. These constraints have profound effects on when big bodies are in danger of collapsing under their own weight and when small bodies are in danger of running out of fuel. The section on strength provides a
Mel Siegel
International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 285–299
Article
Use of spent mushroom substrate (SMC) for energy production appears as a response to the problem with the utilization of this waste throughout the whole year. In the Polish national energy supply system, which is based mainly on hard coal and lignite, use of biomass may contribute to limiting CO2 emissions. The work presents a comparative analysis of the unit emission of CO2, CO, SO2, NOx and particle matter referred to the unit of energy produced from the referenced hard coal, spent mushroom
Monika CZOP,
Krzysztof PIKOŃ
Architecture, Civil Engineering, Environment , ISSUE 1, 95–102
Research paper
This paper presents the impact of utilizing a biased energy distribution (BED) scheme for clustering sensor networks. In clustering sensor networks, some of the nodes are elected as aggregators and they compress the data from their cluster members before sending the aggregated data to the sink. Existing clustering routing protocols assume that all the nodes are provided with equal amount of energy but this shortens the network lifetime and makes the network unstable. This paper proposes a
A. F. Salami,
H. Bello-Salau,
F. Anwar,
A. M. Aibinu
International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 161–173
research-article
1.
INTRODUCTION
Energy consumption is gradually increasing due to the increase in user-oriented comfort requirements besides the continuously growth in population and building stock. According to the 2010 AR5 Report (Fifth Assessment Report) by IPCC (Intergovernmental Panel on Climate Change), globally 32% of the total energy consumption and 19% of the greenhouse gas emissions belong to the buildings [1]. The energy data of EU in 2016 shows that these rates increased to 40% and 36
Dinçer AYDIN,
Esma MIHLAYANLAR
Architecture, Civil Engineering, Environment , ISSUE 1, 5–18
Article
The paper presents a mathematical model of the selected energy crops gasification. Firstly, the experimental study of the biomass gasification process using fixed-bed reactor was conducted. The highest calorific value was obtained from the gasification of Miscanthus x giganteus (3.84 MJ/m3n). Based on the experimental results, a model of the gasifier built in Aspen Plus was verified. The developed mathematical model of the gasification system properly reflects the processes occurring in the
Anna SKOREK-OSIKOWSKA,
Wojciech UCHMAN,
Sebastian WERLE
Architecture, Civil Engineering, Environment , ISSUE 3, 135–141
Research Article
In view of unbalanced link bandwidth and node energy consumption in Underwater Acoustic Sensor Networks (UASNs), a distributed topology optimization control algorithm (EL-BatCA) is proposed, which is based on balanced network energy and load. A hierarchical network model is designed based on minimum-hop, by which the nodes are divided into n layers. EL-BatCA is implemented through three stages-topology graph formation in initialization, an innovative transmission power adjustment in topology
Wenyan Fu,
Deshi Li,
Jian chen,
Yanyan Han,
Jugen Nie
International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 138–159
Research Article
Abstract
The article presents the case study of the comprehensive diagnosis of an existing residential building with natural ventilation. The results of quick diagnostics of thermal insulation of the building, the heating system, ventilation, domestic hot water preparation and the quality of the environment in the rooms were presented. Based on the data obtained by measurements, the energy performance of the building was prepared using the building certification calculation method. The energy
Dorota BARTOSZ
Architecture, Civil Engineering, Environment , ISSUE 4, 137–150
Research Article
This paper presents a design of magnetic field alarm powered by magnetic energy harvesting. It consists of an energy harvesting module, Cockcroft-walton circuit and piezo buzzer. The energy harvesting module is composed of coil and magnetic flux concentration core. It can generate 200 µW from an environmental magnetic field of 200 µT at 60 Hz. The Cockcroft-walton circuit can converts the ac voltage to a suitable dc voltage for the piezo buzzer. This alarm can notice not only
Kunihisa Tashiro,
Azusa Ikegami,
Syoichiro Shimada,
Hiroaki Kojima,
Hiroyuki Wakiwaka
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 1–5
research-article
1.
INTRODUCTION
In the era of air pollution and too large production of carbon dioxide, the emphasis is put on energy-saving construction. [1] One of the types of such a trend in the construction industry is passive construction [2].
This paper presents the analysis of a kindergarten building project to show whether an object can be described as a passive building. It also includes a kindergarten user satisfaction survey to confirm the thesis about the comfort of the use of energy-saving and
Ada KOŁODZIEJCZYK-KĘSOŃ
Architecture, Civil Engineering, Environment , ISSUE 1, 19–32
Article
Spectrum sensing, the problem of detecting the presence of licensed user in the channel is considered in this paper. Energy detection is best suited for the spectrum sensing when prior knowledge about the primary users is unavailable. Existing works report improved versions of energy detection which primarily focuses on maximizing the detection performance. Sensing error minimization is an important aspect of spectrum sensing that needs attention. This paper focuses on the sensing error
K. Muthumeenakshi,
S. Radha
International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 2014–2034
Article
This paper aims to propose a framework for optimizing performance in cluster-based wireless sensor networks (WSNs) with constrains of energy consumption, delay and connectivity. For the limitation of energy storage being discussed a lot, many researches try to find more solutions to improve it. But, the other index of wireless sensor networks may be deteriorated by many routings which are dedicated to optimizing energy consumption. Thereby, multi-objectives optimization is one of significant
Ting CAO,
Yuhao WANG,
Xinmin XIONG,
Yan HAO
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 2103–2118
Article
this paper, we propose a new unequal clustering algorithm based on the partitioned circles network model, having better accuracy in the energy consumption analysis than the rectangular one. The superiority of the algorithm we propose is cluster parameters, by which the region width and cluster-head probability, are obtained with a complete energy consumption analysis. Through the simulation evaluation, the algorithm brings the better performance than the equal clustering.
Amin Suharjono,
Wirawan,
Gamantyo Hendrantoro
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 1808–1829
research-article
INTRODUCTION
Human cognition may be enhanced by energy drinks containing caffeine and/or other stimulants (such as taurine, vitamin B, guarana, yerba mate, acai, ginseng, maltodextrin, inositol, carnitine, creatine, glucuronolactone, and ginkgo biloba), which are thought to improve cognitive performance, alertness, mood, attentional performance, increase wakefulness, help maintain attentional focus, concentration, endurance information processing and vigilance, decrease fatigue, and reduce
Karina Maciejewska,
Karolina Grabowska
Acta Neurobiologiae Experimentalis , ISSUE 4, 411–423
Research paper
In this paper, we propose a novel posterior belief clustering (PBC) algorithm to solve the tradeoff between target tracking performance and sensors energy consumption in wireless sensor networks. We model the target tracking under dynamic uncertain environment using partially observable Markov decision processes (POMDPs), and transform the optimization of the tradeoff between tracking performance and energy consumption into yielding the optimal value function of POMDPs. We analyze the error of
Bo Wu,
Yanpeng Feng,
Hongyan Zheng
International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 628–641
Article
thermal conditions. The multilayer wall, therefore, plays a major role in the thermal shielding of a building and is a key component in energy efficiency. And the use of new construction materials the wall functionality has been expanded. This application has also expanded the role of a wall in the process of energy management of a building. A non-transparent wall can produce electricity, supply heat from solar radiation, absorb, store and distribute heat. It can be responsible for stabilizing room
Jarosław FIGASZEWSKI,
Joanna SOKOŁOWSKA-MOSKWIAK
Architecture, Civil Engineering, Environment , ISSUE 1, 5–10
Research Article
In this paper, we report a detailed description of developed Flex-SPI firmware structure together with experimental tests carried out by using ad-hoc instrumental setups based on TI MSP-EXP430F5438 experimenter boards. Developed framework, aimed to provide a solid base to test the possibility of performing a shared SPI communication with a fixed number of wires without renouncing to push-pull output stage advantages, has been implemented and successfully validated. Also, FlexSPI energy
P. Visconti,
G. Giannotta,
R. Brama,
P. Primiceri,
R. de Fazio,
A. Malvasi
International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 754–792
Article
At the beginning of the paper, the analysis of energy efficiency indicators for freight electric locomotive with asynchronous traction drive feeding from AC network under various operating conditions including when working with trains of various masses is made. The movement on different railway sections is considered. The graphs of locomotive’s speed, traction force, consumed power, and power for the traction obtained by on-board recorder are shown. In addition, the dependence of the
Andrey Andryushchenko,
Pavel Kolpahchyan,
Alexander Zarifyan Jr.
Transport Problems , ISSUE 2, 103–110
Article
A multi-cluster-head based clustering routing algorithm is researched and realized in order to achieve better balance the energy consumption of wireless sensor network nodes as well as promote the stability and extend the service life of the network. By taking cluster as the basic unit, it divides the wireless sensor network into multiple clusters, each of which includes a main cluster head node, an assistant cluster head node, a cluster management node and several ordinary nodes. The article
Jie Huang
International Journal of Advanced Network, Monitoring and Controls , ISSUE 4, 15–19
Article
A study has been conducted on the use of alternative energy sources for propulsion of a vessel in inland waterway transport. It is clear that at this stage it is most appropriate to use a vessel designed for short-haul trips between two banks of a ferryboat for passengers and luggage or for recreation and entertainment. On this basis, research has been conducted on a newly designed and built vessel to carry up to 12 people. The drive is fully powered by 180-Ah batteries at 48 V. The batteries
Velizara PENCHEVA,
Asen ASENOV,
Ivan BELOEV,
Valeri GEORGIEV
Transport Problems , ISSUE 3, 109–120
Article
Recent trends in wireless sensor networks leads to the development of new protocols for data gathering. In this paper, a secure energy efficient location aware data gathering approach is introduced to secure data gathering. An Elliptic Curve Diffie Hellman Key Exchange (ECDHKE) algorithm is utilized for key generation and key exchange between the sensor nodes to maintain security and prevent the data from malicious nodes. The performance of the proposed scheme is validated in terms of packet
M. Roseline Juliana,
S. Srinivasan
International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 1748–1767
Article
The use of electrically powered vehicles is becoming more and more established in practice and represents a promising solution in future ensuring quality mobility and reducing the pollution in the environment. Since these vehicles are high-priced, and there is still a low awareness among consumers in terms of energy consumption and pollution, vehicles with an internal combustion engine remain the norm. For this purpose, the study, here, provides an energy consumption estimate of an electric
Robert Robert Muha,
Aleš Peroša
Transport Problems , ISSUE 2, 49–58
Article
This paper describes an intelligent system for monitoring photovoltaic plants, detecting thefts or malfunctions and optimizing energy production by algorithm to drive solar trackers. Sensing/processing board detects environmental parameters and calculates produced power/energy for monitoring efficiency while anti-theft system reveals any critical condition. Designed board controls biaxial trackers calculating sun position and following solar orbit to optimize energy production. Monitoring and
P. Visconti,
A. Lay-Ekuakille,
P Primiceri,
G. Cavalera
International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 681–708
Review
sewage sludge as an energy raw material for further biogas production processes. The biogas generated at the municipal wastewater treatment plant in the process of anaerobic fermentation of sewage sludge is a source of renewable energy. The use of biogas for energy purposes at sewage plants necessitates the adoption of appropriate conditioning procedures to remove contaminants such as sulfur compounds, siloxanes, nitrogen, ammonia, water. Presently, the most commonly used management method of biogas
Józef CIUŁA,
Krzysztof GASKA,
Łukasz ILJUCZONEK,
Agnieszka GENEROWICZ,
Viktor KOVAL
Architecture, Civil Engineering, Environment , ISSUE 2, 131–140
Research Article
This article focuses on the synthesis of conditional dependence structure of recursive Bayesian estimation of dynamic state space models with time-varying parameters using a newly modified recursive Bayesian algorithm. The results of empirical applications to climate data from Nigeria reveals that the relationship between energy consumption and carbon dioxide emission in Nigeria reached the lowest peak in the late 1980s and the highest peak in early 2000. For South Africa, the slope trajectory
Olushina Olawale Awe,
Abosede Adedayo Adepoju
Statistics in Transition New Series , ISSUE 1, 123–136
Article
The paper analyzes the possibility of using the energy signature method based on the linear regression to determine the seasonal energy demand for cooling and ventilation in the office building. The “extended” energy signature method (H-m method) was described and applied. In accordance with Standard (EN 15603) the estimation of energy consumption for cooling can be performed for a period shorter than the entire season, but data range must be appropriate to obtain the correct accuracy of the
Dorota BARTOSZ,
Aleksandra SPECJAŁ
Architecture, Civil Engineering, Environment , ISSUE 2, 133–143
Article
In this paper the development of a Wireless Sensor Network (WSN) for construction noise identification and sound locating is investigated using the novel application of Bluetooth Low Energy (BLE). Three WSNs using different system-on-chip (SoC) devices and networking protocols have been prototyped using a Raspberry Pi as the gateway in the network. The functionality of the system has been demonstrated with data logging experiments and comparisons has been made between the different WSN systems
Josie Hughes,
Jize Yan,
Kenichi Soga
International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 1379–1405
Article
In the modern world it is increasingly referred to the concept of intelligent building. Intelligent building referred to above all energy-efficient building, using alternative energy sources, as well as equipped with modern energy efficient technologies that reduce the energy consumption of the building in general. But for all the time and does not set forth a definition of intelligence buildings, which leads to different opinions and approaches to the understanding of the term.
Anna Doroshenko,
Andrey Volkov
International Journal of Advanced Network, Monitoring and Controls , ISSUE 1, 115–119
Research Article
In recent years, wireless sensor network (WSN) is a rapidly evolving technological platform with tremendous and novel applications. Many routing protocols have been specially designed for WSN because the sensor nodes are typically battery-power. To prolong the network lifetime, power management and energy-efficient routing techniques become necessary. In large scale wireless sensor networks, hierarchical routing has the advantage of providing scalable and resource efficient solutions. To find
Xiangyuan Yin,
Zhihao Ling,
Liping Guan
International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 523–547
Article
European Directive on energy efficiency requires the settlement of energy consumers according to the actual consumption. The use of properly operating and socially acceptable settlement systems of individual heating costs contributes to energy savings in the residential sector. The paper presents the national legal requirements in this field and the possibility of using different settlement systems of heating costs. The main causes of irregularities in settlements of individual heating costs
Aleksandra SPECJAŁ,
Halina CIUMAN
Architecture, Civil Engineering, Environment , ISSUE 3, 143–151
Research Article
Two controllers are proposed in this paper. These controllers have been designed and implemented on the rectifier and quasi impedance-source inverter (QZSI) in the wind energy conversion system based on permanent magnet synchronous generator (PMSG). Model based predictive control strategy (MBPC) has been used at the proposed design for both controllers. Control of parameters such as load current, inductor current and capacitor voltage are the major aim of design of predictive controllers; hence
Hamed Javaheri Fard
International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 451–490
Research Article
In mainly we present a compact, multisource and battery-free energy harvesting from engine source. This battery free generator captures energy from its environment transient thermal gradients as a main source, and vibration as a secondary source allowing early biasing of the generator and stores this energy in ultra-capacitors .In this way, this multi-source architecture benefits from the synergy between energy scavenging and harvesting.
A.Ahmed Meeran Mydeen,
Kelwin Inasu,
M. Venkatesh,
C. Suthesh
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 198–211
Article
The main directions of development of the energy-saving technologies in electrified transport systems are considered in the article with taking into account the flexible regulating features of modern power equipment. The proposed theory and principles of functioning allow understanding the optimal control laws for converters, accumulators, and renewable energy sources in their integration into traction power supply systems. Research opens the possibility of the installed power of the required
Dmytro BOSYI,
Oleh SABLIN,
Iryna KHOMENKO,
Yevhen KOSARIEV,
Ivan KEBAL,
Sergii MYAMLIN Jr.
Transport Problems , ISSUE SE, 57–70
Article
Heat gains from the sun affect the heat balance of building by reducing the energy demand at certain periods of the year and increasing it at others. Windows, especially the type of glazing, are a determining factor in the successful use of solar gains. The aim of the research presented in the paper is to analyse the effects of the type and size of windows on annual heating and cooling energy consumption considering the energy costs in Polish climate conditions. Additionally the influence of
Joanna FERDYN-GRYGIEREK,
Krzysztof GRYGIEREK
Architecture, Civil Engineering, Environment , ISSUE 4, 133–140
Research Article
Summary. This paper is devoted to the problem of reducing vehicle energy consumption. The authors consider the optimisation of highway driving cycle a way to use the kinetic energy of a car more effectively at various road conditions. The model of a vehicle driving control at the highway which consists of elementary cycles, such as accelerating, free rolling and deceleration under forces of external resistance, was designed. Braking, as an energy dissipation regime, was
Zinoviy STOTSKO,
Myroslav OLISKEVYCH
Transport Problems , ISSUE 2, 123–131
Article
In recent years, the research and development of energy-saving control in air-condition system has become a hot spot with the advance of science and technology. In this paper, we proposed a fuzzy control mechanism for air-condition system, which combines the fuzzy control and multi-point sensing technology. When people feel cooler or hotter indoor, the air condition should promptly detect the temperature variance and switch the temperate between hot and cool smoothly. Therein an intelligent
Tzu-Ming Wang,
I-Ju Liao,
Jen-Chi Liao,
Tain-Wen Suen,
Wei-Tsong Lee
International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 636–652
Research Article
The energy efficiency increase problem for railway rolling stock pneumatic systems compressed air preparation is directly connected with its purification and drying technology choice. In the presented materials in the article, the authors find a solution to the problem based on realization analysis of different factors that affect compressed air quality, purification and drying technology choice, as well as based on energy efficiency analysis. To realize the energy-saving events at railway
Tatiana RIPOL-SARAGOSI,
Leonid RIPOL-SARAGOSI,
Igor SMYCHOK
Transport Problems , ISSUE 4, 13–21
Article
complexity of the devices involved increased to the point where international co-operation was the only way forward.
Fusion powers the Sun and stars as hydrogen atoms fuse together to form helium, and matter is converted into energy. Hydrogen, heated to very high temperatures changes from a gas to plasma in which the negatively-charged electrons are separated from the positively-charged atomic nuclei (ions). Normally, fusion is not possible because the strongly repulsive electrostatic forces between the
Stewart C. Prager
International Journal of Advanced Network, Monitoring and Controls , ISSUE 4, 1–10
Article
Energy control in Wireless Sensor Network is one of the most crucial technologies. Based on the acoustic object localization background, we designed a new structure of the sensor node to realize the energy efficiency in the power supply and artificial sleeping scheduling in this paper. The power control model is independent with data processing and control model and can separately realize the power supply for different part of the node. The node can transfer status according the different
ChengFang Zhen,
Wenyi LIU,
Hanming WEI
International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 1997–2017
Article
This paper presents the possibility of using a fuzzy controller to correct metrological properties of an electric traction energy meter. So far, no algorithms based on fuzzy logic to determine the desired conversion value of the current channel of the electricity meter have been applied. Currently, for the mentioned channel, conventional methods of gain determination are used, based on a sequential algorithm that controls operation of the programmable gain amplifier. The proposed corrector is
Bartosz DOMINIKOWSKI,
Krzysztof PACHOLSKI,
Jan ANUSZCZYK,
Andrzej GOCEK
Transport Problems , ISSUE 1, 147–158
Article
In this paper, we proposed to use the Efficient Indoor Thermal Time Constant (EITTC) to characterize the indoor thermal response in old buildings. Accordingly, a low cost, energy-efficient, wide-applicable indoor thermal modeling solution is developed by combining Wireless Sensor Network (WSN) and Artificial Neural Network (ANN). Experiments on both prototype and building room showed consistent results that the combination of WSN and ANN can provide accurate indoor thermal models. A linear
Yi Zhao,
Valentin Gies,
Jean-Marc Ginoux
International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 869–895
Article
Energy is the main resource for our country to survive. However, in recent years, the excessive consumption of energy has made the environment worse and worse, and made the development of our country restricted. Technology of circulating fluid-bed boiler is the main way of general clean coal at present, and is a hot topic for each country in the world. However, the experimental process of the technology often spend a great cost, therefore is not suitable in practice. So simulation technology of
Yingtao Hou,
Xiuhua Jiang
International Journal of Advanced Network, Monitoring and Controls , ISSUE 4, 202–206
Research paper
It is unclear if habituation of hindbrain A2 metabolo-sensory neurons to recurrent insulin-induced hypoglycemia (RIIH) correlates with estradiol-dependent adjustments in energy metabolism that favor positive energy balance. Laser-microdissected A2 cells from estradiol- or oil-implanted ovariectomized female rats were analyzed by Western blot to assess effects of three prior daily insulin injections on basal and hypoglycemic patterns of catecholamine biosynthetic enzyme dopamine-beta-hydroxylase
Pratistha Tamrakar,
Karen P. Briski
Acta Neurobiologiae Experimentalis , ISSUE 1, 31–44
Article
This article concerns the issue of reduction of CO2 emission in hybrid vehicles. External lighting through LED technology was applied to show additional CO2 savings in these vehicles. The authors propose for hybrid vehicles of M1 category: conditions of testing external lights, research equipment with measuring system and measuring method in order to determine energy savings obtained by application of external LED light. It enables to calculate saving of CO2 emission and estimate potential
Zbigniew ŁUKASIK,
Jacek KOZYRA,
Aldona KUŚMIŃSKA-FIJAŁKOWSKA
Transport Problems , ISSUE SE, 87–94
Article
The main goal of the Task 4 “Development of thermal diagnostics of buildings” of Strategic Research Project “Integrated System for Reducing Energy Consumption in the Maintenance of Buildings” was to develop new tools for thermal diagnostics of different types of buildings, including development of the rapid method of a cooling sources diagnostics. The paper presents a method for assessing the cooling sources based on on-site measurements. The cooling capacity of the cooling sources and the
Maria HURNIK,
Monika BLASZCZOK,
Małgorzata KRÓL
Architecture, Civil Engineering, Environment , ISSUE 2, 157–163
Research Article
In many outdoor locations solar power provides the greatest power densities for energy harvesting to power wireless sensor networks in comparison to other practical alternative such as wind, vibrations or temperature gradients. Since solar power is highly variable with location and time, it is necessary to optimise the sensor nodes for individual locations. Presented here, is an assessment of the solar power availability in Manchester, UK (53°28′N, 2°14′W). Wireless
Ralph Stevenson-Jones,
Med Benyezzar,
Patricia Scully
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 1–5
research-article
elastic application of the recovery order: Reduce, Reuse, Recycle, Recover [1, 2, 3]. The main assumption of the Directive [3] is establishing laws which would promote the idea of „recycling society” that tries to limit the production of waste and use them as raw materials and sources of energy. By applying the above rule, we gradually approach the circular economy. The circular economy is an idea of producing and consuming energy, products or services in such a way as to limit demand for fuels
Monika CZOP
Architecture, Civil Engineering, Environment , ISSUE 3, 123–129
Research Article
Energy detection is best suited for the detection of licensed users when prior knowledge about them is unavailable. However, the presence of noise uncertainty refrains the use of energy detection for spectrum sensing. In this paper, we propose a refined energy detection (RED) which used dual threshold in the presence of noise uncertainty, and combine the concepts from game theory to achieve further performance improvements. The secondary user payoff is defined based on the primary user activity
K. Muthumeenakshi,
S. Radha
International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 146–173
Article
Aim of this work is the design of a programmable electronic system for monitoring the environmental parameters and managing the electrical functions of a thermo-solar plant. The designed control unit detects data from temperature and light sensors, processes acquired information and commands external equipments (pumps, electric valves and power supplies) in order to optimize plant performances and maximize efficiency and energy savings. Recently several researches, in the field of solar thermal
P. Visconti,
P. Primiceri,
P. Costantini,
G. Colangelo,
G. Cavalera
International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 1220–1242
Research Article
Decrease in the time interval between the first node death and the last node death, due to the completion of their energy supply, is the main goal of load-balancing methods in Wireless Sensor Networks (WSN). This paper proposes a Load-Balancing Enhancement (LBE) method, in WSN. LBE method uses a mobile data collector to data gathering from sensor nodes. The mobile data collector can directly communicate with the base station. Indeed, the mobile data collector acts as an interface between
Ahmad Patooghy,
Meisam Kamarei,
Ali Farajzadeh,
Fatemeh Tavakoli,
Mehdi Saeidmanesh
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 1–5
Article
Sergei VASSEL,
Natalia VASSEL
Transport Problems , ISSUE 3, 79–84
Article
in this article, we propose an adaptive image segmentation method based on saliency. First of all, we obtain the saliency map of an image via four bottom-layer feature tunnels, i.e. color, intensity, direction and energy. The energy tunnel helps to describe the outline of objects better in the saliency map. Then, we construct the target detection masks according to the greyness of pixels in the saliency map. Each mask is applied to the original image as the result of pre-segmentation, then
Shui Linlin
International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 408–428
Research paper
Obesity is associated with consumption of energy-dense diets and development of systemic inflammation. Gut microbiota play a role in energy harvest and inflammation and can influence the change from lean to obese phenotypes. The nucleus of the solitary tract (NTS) is a brain target for gastrointestinal signals modulating satiety and alterations in gut-brain vagal pathway may promote overeating and obesity. Therefore, we tested the hypothesis that high-fat diet-induced changes in gut microbiota
Alexandra C. Vaughn,
Erin M. Cooper,
Patricia M. DiLorenzo,
Levi J. O’Loughlin,
Michael E. Konkel,
James H. Peters,
Andras Hajnal,
Tanusree Sen,
Sun Hye Lee,
Claire B. de La Serre,
Krzysztof Czaja
Acta Neurobiologiae Experimentalis , ISSUE 1, 18–30
Article
We propose a routing scheme for data gathering and aggregation in wireless sensor networks. The scheme aims to optimise an aggregation tree in order to minimise the energy dissipation of data aggregation and transmission. A modified particle swarm optimisation algorithm is developed in the proposed scheme. In addition, the routing scheme uses a generic data aggregation model which accommodates different correlation conditions. The performance of the proposed scheme is evaluated and compared
Yuexian Wang,
Cheng Chew Lim
International Journal of Advanced Network, Monitoring and Controls , ISSUE 1, –
Research Article
An autonomous, wireless and self-powered smart sensor is described, addressing the condition monitoring and diagnosis of steam traps, whose performance degradation impairs energy efficiency in most of the process industries. The diagnostic criteria in the two possible failure modes of steam traps are presented, as well as the structure and technologies of the embedded devices for sensing, communication, and power supply, special attention being paid to the capability to run the system on the
Joana R. C. Faria,
Sónia M. V. Semedo,
Francisco J. A. Cardoso,
José Oliveira
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 1–6
Article
Absorption of impact energy by the passive safety elements of the vehicle body is the basic feature to ensure conditions of safety for the driver and passengers in transport. The parts especially designed for this objective in the self-supporting car body are longitudinals. Their energy-absorbing features are designed in different ways. Evaluation of the degree to which the vehicle (body) ensures safety during a collision is difficult and expensive. Usually, tests under impact conditions are
Damian HADRYŚ,
Andrzej KUBIK,
Zbigniew STANIK
Transport Problems , ISSUE 3, 5–16
Research Article
powered railcar, which was built at University of Pardubice, and the energy research, that is realized with this railcar at railway line Mladějov na Moravě - Hřebeč.
Radovan DOLEČEK,
Ondřej ČERNÝ,
Ladislav MLYNAŘÍK,
Petr SÝKORA
Transport Problems , ISSUE 2, 99–107
Article
For the wireless sensor networks (WSNs), MAC layer protocol, relating to system throughput, involving functions of system, concerning the consumption of system energy efficiency, etc. other system indicators, is very important. With the development of WSN, involving vary businesses, the amount and style of data which the sensor nodes detecting is large and divertive. Based on three-dimensional probability CSMA protocol, the proposed protocol, multi-channel three-dimensional probability CSMA
Yifan Zhao
International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 334–352
Research Article
common attribute for wireless communication is the energy required for faithful transmission of a message between two nodes. But the Omni directional antennas lead to interference and wastage of bandwidth and energy. The nodes of wireless communication are however neither always static nor equipped with any infrastructure. Rather the same might as well be ad-hoc and mobile. Another well used notion is that of the unit disk graph (UDG), where a node can communicate only if the other nodes are within
Anindya Nag,
Rajarshi Roy
International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 740–761
Research Article
For the use of green energy and ubiquitous computing, this study investigates miniature electric generators that are constructed with piezoelectric benders. Electric power is generated by vibratory deformation of piezoelectric benders. Three different designs of piezoelectric generators are created and compared in this study by using mechanics analysis. The result shows that the cantilever design yields more power than symmetric and airfoil designs. Experimental results show that generated
Wei Li,
Tzong-Shi Liu,
Heng-I Lin,
Yi-Jeng Tsai
International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 550–572
Article
The Polish National Centre for Research and Development has been coordinating the implementation of a strategic research project “Integrated System for Reducing Energy Consumption in the Maintenance of Buildings”. The main goal of the project is to support Poland's efforts to reduce energy consumption in buildings, which is a strategic goal of the European Union. Within the scope of the aforementioned project, Task 4, “Development of thermal diagnostics of buildings”, was realized. Silesian
Zbigniew POPIOLEK,
Przemysław KATEUSZ
Architecture, Civil Engineering, Environment , ISSUE 2, 125–132
Article
technologies of hydrogen (H2), is carried out. Life cycle assessment (LCA) method is used. A comparison, concerning fuel consumption and emissions as CO2 equivalent for the whole life cycle, is done for FCEV and conventional gasoline vehicle (GV). The influence of the energy mix and technology of production of hydrogen on spent energy and air pollution is analyzed. As the results show, in countries with CO2 emissions over 447 g per 1 kWh electricity, the technology of hydrogen production from natural gas
Ivan EVTIMOV,
Rosen IVANOV,
Hristo STANCHEV,
Georgi KADIKYANOV,
Gergana STANEVA
Transport Problems , ISSUE 3, 153–166
Research Article
intensive application is realized on an FPGA based architecture so as to determine the sampling rates for which it achieves the highest performance and consumes the least amount of energy as compared to that of a micro-controller based architecture. Based on the measured performance and energy consumption for a computationally intensive application, tri-axes/threechannel vibration based condition monitoring, the results suggest that the FPGA based architecture is the most appropriate solution for
Khurram Shahzad,
Bengt Oelmann
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 1–7
Research Article
Development of mobile phone communication infrastructure in the world has promoted which lead public concern over possible health effect exposure to radio frequency electromagnetic energy (RFEME) emanating from mobile phone antenna. The Micro-strip patch antenna plays an important role in electromagnetic energy transmitting and receiving phenomena in mobile phone. This paper makes an effort to assess the mobile radiation exposure effect on 4 years child, 8years child and an adult head model
M. Anto Bennet,
J. Surekha Poomathi,
C. Kalpana,
S. Sariga Priya
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 374–394
research-article
that prompted us to use the classification of speech to command comfort. But after using this system, we noticed that it has some faults, such as in some situations, it will not be able to command the comfort, and these situations are:
If the person is sick to a point where he will not be able to speak, or if his voice has changed a lot, then in this case, the system will not be able to command the comfort and the energy will not be optimized.
If the person is asleep leaving the lights on, the
Henni Sid Ahmed,
Jean Caelen
International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 1–28
Article
This paper proposed an image fusion method based on a novel scheme with joint nonsubsampled contourlet and overcomplete brushlet transform. And an improved region energy operator is employed as the fusion strategy, which can take full advantage of the anisotropic texture information and multidimensional singular information in the new multiresolution domain. Experimental results shows that the proposed method improved the fusion results not only in visual effects but also in objective
Zhang Pai
International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 2186–2203
Article
This paper describes a harvesting and power management system that can be equipped with a Wireless Sensor Network (WSN) node in order to harvest energy presents in the environment to be used for sensor node power supply. The proposed scope is to develop a harvesting board exploiting available integrated circuits and devices for extending battery life-cycle of sensor node developed by Medinok SPA. The aim is to realize a WSN able to perform a monitoring of principal physical parameters deemed of
P. Visconti,
R. Ferri,
M. Pucciarelli,
E. Venere
International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 1637–1667
Article
The paper presents the results of identification and assessment of the energy demand for cooling purposes in the museum building. The analysis of cooling demand and assessment of indoor air quality were performed by the simulation analysis and validated by the measurement campaign of the indoor air quality in the building under consideration. For the purpose of thermal analysis the IDA ICE software was used. All simulations were carried out using meteorological data recorded by the local
Joanna FERDYN-GRYGIEREK,
Andrzej BARANOWSKI
Architecture, Civil Engineering, Environment , ISSUE 2, 125–135
Research Article
Optical remote sensing tools are being used in a number of agricultural applications by recording an object's transmission of electromagnetic energy from reflecting and radiating surfaces. This unique spectral information is used to characterize the features of green vegetation. With the development of proximal sensing tools, vegetation or crop health can be determined and monitored in real-time. This information provides an opportunity for precise management of input resources to optimise
R.R. Pullanagari,
I. Yule,
W. King,
D. Dalley,
R. Dynes
International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 125–137
Research Article
voltage in a microgrid. In the simulation using MATLAB, a distributed energy resource unit applying voltage-source converter in order to have three-phase voltage from a DC-source is taken into account. Using system identification to simplify the controller design generates a linear model of the system. The compensated system shows a very good reference tracking capability during set point and load changes. It also reduces the coupling effect due to active and reactive power.
S. D. Panjaitan,
R. Kurnianto,
B.W. Sanjaya,
M. C. Turner
International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 935–954
research-article
1.
INTRODUCTION
Greenhouse gas emissions from transport constitute around 22% of the total CO2 emissions of globally processed energy. However, this emission plays an important role primarily due to the rapid increase in traffic and almost total dependence of transport on fossil fuels. In addition, transport is the fastest growing sector of the economy among all emission sources. According to the latest ITF data, CO2 emissions from passenger transport in the world will increase from 30% to 110
Grzegorz KUBICA,
Marek FLEKIEWICZ,
Paweł MARZEC
Transport Problems , ISSUE 1, 95–103
Research Article
Summary. The fundamental principles of the passive protection concept of high-speed passenger trains at accident collisions on 1520 mm gauge railways have been developed. The scientific methodology and mathematical models for the analysis of plastic deformation of cab frame elements and energy-absorbing devices (EAD) at an impact have been developed. The cab frame and EAD for a new-generation locomotive have been designed. The EAD prototype crash test has been carried out.
Maryna SOBOLEVSKA,
Igor TELYCHKO
Transport Problems , ISSUE 1, 51–62
Article
This article describes the approach of experts of the National Research Moscow State University of Civil Engineering (MGSU) to the construction of modern operating systems in buildings using BIM-technology. This article was performed within the Russian State tasks MGSU project “Methodology of ideas, design and verification of energy-efficient engineering systems conventionally abstract objects (on formal models of buildings)”.
Andrey Volkov,
Pavel Chelyshkov
International Journal of Advanced Network, Monitoring and Controls , ISSUE 1, 25–28
Research paper
The objective of this paper is to study the image communication behavior of a wireless video sensor, and analyze its performance under resource constrained wireless multimedia sensor networks. Energy consumption and rate distortion model of DCT-based coded image compression and transmission is developed. Based on energy consumption and rate distortion model proposed, resource allocation is optimized with limited energy and bandwidth. Number of DCT coefficient and step size of quantization table
Xiong Zheyuan,
Fan Xiaping,
Liu Shaoqiang,
Li Yongzhou,
Zhang Huan
International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 120–135
Research Article
Wireless sensor networks (WSN) are being used for huge range of applications where the traditional infrastructure based network is mostly infeasible. The most challenging aspect of WSN is that they are energy resource-constrained and that energy cannot be replenish. the wireless sensor network of power limited sensing devices called sensor deployed in a region to sense various types physical information from the environment, when these sensors sense and transmit data to other sensors present in
G Vijayalakshmi,
M.Anto Bennet,
P. Shenbagavalli,
M. Vijayalakshmi,
S. Saranya
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 395–413
research-article
The role energy plays are vital in any country’s economy, playing a vital role in its advancement and development and alleviating poverty, under-employment, and security. Uninterrupted supply of energy is a crucial problem today for many countries. Future economic growth is crucial as it depends on energy sources that are affordable, accessible, and environmentally friendly. There is a close link between climate change, the standard of living, state of the public health sector and security of
Moses E. Emetere,
Adeyemo Nehemiah
International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 1–7
Article
The requirements for the inspection of heating systems have been introduced in the Energy Performance Act. Thermal diagnostics of the system is an evaluation of the technical conditions of the heating and hot water installations, due to their energy efficiency and reliability of obtaining the required internal temperature in the building and delivery of the right amount of domestic hot water at the proper temperature. Data obtained from the diagnostics are useful for proper energy-efficient
Aleksandra SPECJAŁ,
Halina CIUMAN
Architecture, Civil Engineering, Environment , ISSUE 2, 165–173
Research Article
to obtain human mental models; the other is a finite element method (FEM) to evaluate the tactile stimulus that causes VHI. Based on psychophysical experiments using Thurstone's Paired Comparison, VHI strength depends on the distance between two adjacent wires, and VHI caused by wide spacing of wires is considerably stronger than that caused by narrow spacing. In FEM analysis, a mesh model of fingertips is produced to mimic an actual finger to evaluate the strain energy density (SED) because one
M. Ohka,
Y. Kawabe,
A. Chami,
R. Nader,
H. B. Yussof,
T. Miyaoka
International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 488–503
Research Article
Fixed-power wireless sensor networks are prevalent and cost-effective. However, they face mote failures, RF interference from environmental noise and energy constraints. Routing protocols for such networks must overcome these problems to achieve reliability, energy efficiency and scalability in message delivery. Achievement of these requirements, however, poses conflicting demands. In this work, we propose an efficient and reliable routing protocol (EAR) that achieves reliable and scalable
B. Sathyasri,
Dr.E. N.Ganesh,
Dr. P. Senthil Kumar,
S. Rathna,
R. Jaishree Bai,
G. Nalini
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 358–373
Research Article
M.Anto Bennet,
B Thamilvalluvan,
C.A. Hema Priya,
B. Bhavani,
M. Shalini
International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 69–86
Article
In-network data aggregation plays an important role on energy consumption from the point of reducing the amount of communication in cluster-based wireless sensor networks. The selection of cluster heads is usually based on two criteria which are the number of cluster heads network needed and the times of every node serving as the cluster head. Too much or too little cluster head number will shorten the network lifetime for the energy premature depletion of some sensor nodes, so it has a great
Mingxin Yang
International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 1935–1955
Article
Wireless sensor networks (WSNs) are composed of set sensor nodes communicating through wireless channels with limited resources. Therefore, several routing protocols and approaches about energy efficient operation of WSNs have been proposed. Clustering algorithm based routing protocols are well used for efficient management of sensing sensor node energy resources. However, many researches were focused on optimization of well-known hierarchical routing approaches of WSNs using fuzzy logic system
hassan EL ALAMI,
Abdellah NAJID
International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 2286–2306
Article
Wireless sensor networks (WSNs) are prone to various kinds of threats and are subjected to several constraints like energy, communication overhead and lifetime. Application of bio-inspired algorithms based trust models has shown significant improvement in the security mechanism of the wireless sensor networks. This paper presents a brief survey on application of Ant Colony Optimization (ACO) and significance of trust models in WSNs. ACO application in routing, increase in lifetime, energy
G. Edwin Prem Kumar,
K. Baskaran,
R. Elijah Blessing,
M. Lydia
International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 1243–1260
Article
This paper aims at improve the poor stability and the fluttering problems on picking apples for picking robot arm, we establish the dynamics model of Picking Robot Arm using Lagrange equation and divide the whole movement space of Picking Robot Arm into stretch area and picking area by analyzing the dynamic model. Making full using of the model, we put forward to the strategy based on the extension energy control and LQR Zone control. Furthermore, we solve the problem on ensuring the picking
Zhang Zhiyong,
Huang Lvwen,
Xu Yang,
Zhang Xiaoting
International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 1174–1200
Article
issue is extremely important from the point of view of economic, environmental, and corporate social responsibility. The main problems of the environmental policy are areas related to waste, water, and energy management. Some airports take up challenges related to the implementation of innovative solutions, including sustainable energy management. Tasks related to reducing energy consumption and increasing the use of green energy at airports will be of key importance.
Dariusz TŁOCZYŃSKI,
Małgorzata WACH-KLOSKOWSKA,
Rodrigo MARTIN-ROJAS
Transport Problems , ISSUE 4, Part 2, 287–300
Research Article
Outlier detection plays a crucial role in secure monitoring in Wireless Sensor Networks (WSN). Moreover, outlier detection techniques in WSN face the problem of limited resources of transmission bandwidth, energy consumption and storage capacity. In this paper, similar flocking model is proposed and a cluster algorithm based on similar flocking model (CASFM) is put forward to detect outliers in real-time stream data collected by sensor nodes. The similar flocking model improves the Vicsek model
Cheng Chunling,
Wu Hao,
Yu Zhihu,
Zhang Dengyin,
Xu Xiaolong
International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 18–37