Article | 19-April-2021
. Obviously, this method is inconvenient and also leads to the waste of IP addresses.
If the NAT is introduced into the router in the community, and a LAN is set up in the community to use the internal IP address. Finally, the problem will be solved. For example, the internal IP is 192.168.0.0/8. When the user 192.168.0.5 sends data packets to the 184.108.40.206 on the Internet. The community Router first finds the next hop 220.127.116.11 of the best route in its routing table, so NAT converts 192.168.0.5
International Journal of Advanced Network, Monitoring and Controls, Volume 6 , ISSUE 1, 28–34