Search

  • Select Article Type
  • Abstract Supplements
  • Blood Group Review
  • Call to Arms
  • Hypothesis
  • In Memoriam
  • Interview
  • Introduction
  • Short Report
  • abstract
  • Abstracts
  • Article
  • book-review
  • case-report
  • case-study
  • Clinical Practice
  • Commentary
  • Conference Presentation
  • conference-report
  • congress-report
  • Correction
  • Editorial
  • Editorial Comment
  • Erratum
  • Events
  • Letter
  • Letter to Editor
  • mini-review
  • minireview
  • News
  • Obituary
  • original-paper
  • Original Research
  • Pictorial Review
  • Position Paper
  • Practice Report
  • Preface
  • Preliminary report
  • Product Review
  • rapid-communication
  • Report
  • research-article
  • Research Communicate
  • research-paper
  • Research Report
  • Review
  • review -article
  • review-article
  • Review Paper
  • Sampling Methods
  • Scientific Commentary
  • short-communication
  • Student Essay
  • Varia
  • Welome
  • Select Journal
  • In Jour Smart Sensing And Intelligent Systems
  • Journal Of Social Structure
  • Polish Journal Of Microbiology
  • Journal Of Nematology
  • International Journal Advanced Network Monitoring Controls
  • Sj Child Adolescent Psychiatry Psychology
  • Transport Problems
  • Architecture Civil Engineering Environment
  • Immunohematology
  • Connections
  • Acta Neurobiologiae Experimentalis
  • Statistics In Transition

 

Research Article

Active Modeling Based Yaw Control of Unmanned Rotorcraft

With the characteristics of input nonlinearity, time-varying parameters and the couplings between main and tail rotor, it is difficult for the yaw dynamics of Rotorcraft to realize good tracking performance while maintaining stability and robustness simultaneously. In this paper, a new kind of robust controller design strategy based on active modeling technique is proposed to attenuate the uncertainties pre-described in the yaw control of unmanned systems. Firstly, by detailed analysis, the

Yan Peng, Wenqing Guo, Mei Liu, Shaorong Xie

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 380–399

Article

Research on Vehicle Detection Method Based on Background Modeling

This paper mainly studies the background difference method in the field of intelligent traffic, proposes a background modeling method base on frame difference, and compares it with the statistical average background model and Gaussian distribution background modeling method. vehicle contour obtained by the morphological method. Finally, experiments were carried out on 4 normal road traffic surveillance videos, the effective detection rate used in this paper reaches 93.75%, which has a certain

Zhichao Lian, Zhongsheng Wang

International Journal of Advanced Network, Monitoring and Controls , ISSUE 2, 6–9

Review

REVIEW ON MODELING AND CONTROLLER DESIGN IN PNEUMATIC ACTUATOR CONTROL SYSTEM

Pneumatic actuators are highly nonlinear characteristics and uncertainties make it difficult to achieve high performances. The objective of this paper is to present a brief overview of pneumatic actuators based on modeling and control strategies that has been proposed by various researchers. Before the main discussion, some background information will be presented in a relation to pneumatic actuators. This review concludes with a short summary and discussion of modeling and control approaches

M. F. Rahmat, N. H Sunar, Sy Najib Sy Salim, Mastura Shafinaz Zainal Abidin, A. A Mohd Fauzi, Z. H. Ismail

International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 630–661

Article

3D Modeling of the Relievo Based on the Computer Active Vision

At present, the 3D modeling of the small relievo which is lack of real texture or no real texture is a huge difficulty and challenge. The paper provides a good way based on the computer active vision. The slide projector as an active sensor is steered in the principle of the traditional binocular vision. The slide projector could supply the designed texture features to the small relieve, which is easy to be extracted out and matched well because they are clear and stable. The space forward

Wu Gui, Tao Jun

International Journal of Advanced Network, Monitoring and Controls , ISSUE 2, 68–75

Article

EXPERIMENTAL MONITORING AND NUMERICAL MODELING OF THE THERMAL REGIME OF SELECTED TRACK SUBSTRUCTURES

The initial part of the paper characterizes major research activities at the Department of Railway Engineering and Track Management (DRETM), Faculty of Civil Engineering, University of Žilina. Subsequently, it outlines the state of art in the field of track substructure dimensioning for the non-traffic load in Slovakia and abroad. The second part of the paper deals with the method of collecting input parameters for numerical modeling of the track substructure freezing using SoilVision software

Libor IŽVOLT, Peter DOBEŠ, Stanislav HODÁS

Transport Problems , ISSUE 4, 89–100

Research Article

SIMULATION MODELING IN IMPROVING PEDESTRIANS’ SAFETY AT NON-SIGNALIZED CROSSWALKS

Summary. The paper presents an analysis of road traffic accidents at non-signalized pedestrian crosswalks. A field study was conducted to determine the parameters for traffic and pedestrian flow, and construct the simulation models enabling experimentation at different loadings on the street and road network. Variants for improving the pedestrian safety at non-signalized crosswalks have been proposed. Simulation modeling of the proposed managerial decisions is expected to diminish the

Irina MAKAROVA, Rifat KHABIBULLIN, Vadim MAVRIN, Eduard BELYAEV

Transport Problems , ISSUE 4, 139–150

Article

REVIEW ON MODELING AND CONTROLLER DESIGN OF HYDRAULIC ACTUATOR SYSTEMS

The purpose of this paper is to review the literature on modeling and previous control strategies of the hydraulic actuator system proposed by most of the researchers around the world. Before comes to the main discussion, some background information related to hydraulic actuator will be presented. This review includes a short summary and conclusion for hydraulic actuator system. The repercussion of this review is for future inventions of a better and robust hydraulic actuator system.

S. Salleh, M. F. Rahmat, S. M. Othman, K. A. Danapalasingam

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 338–367

Article

MODELING OF THE BURNING PROCESS IN THE PISTON ENGINES WITH VARIOUS CONCEPTS OF THE WORKING PROCESS

In this paper, the results of modeling of the burning process in the piston engines whose working process is realized on the basis of various conceptual approaches are presented: in diesel with direct injection of the fuel; in a gas engine with spark ignition; and in a two-fuel engine (in the gas-diesel), where the mixture of natural gas and air ignites with the help of the fuse dose of the diesel fuel. The models of burning based on the different in-principle approaches are analyzed and used

Tamaz NATRIASHVILI, Revaz KAVTARADZE, Merab GLONTI

Transport Problems , ISSUE 1, 39–48

Article

WSN BASED THERMAL MODELING: A NEW INDOOR ENERGY EFFICIENT SOLUTION

In this paper, we proposed to use the Efficient Indoor Thermal Time Constant (EITTC) to characterize the indoor thermal response in old buildings. Accordingly, a low cost, energy-efficient, wide-applicable indoor thermal modeling solution is developed by combining Wireless Sensor Network (WSN) and Artificial Neural Network (ANN). Experiments on both prototype and building room showed consistent results that the combination of WSN and ANN can provide accurate indoor thermal models. A linear

Yi Zhao, Valentin Gies, Jean-Marc Ginoux

International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 869–895

Research Article

TIRE WEAR MODELING

Rosen IVANOV

Transport Problems , ISSUE 3, 111–120

Article

MODELING AND MEASUREMENT SYSTEM FOR MAGNETIC FIELD DISTRIBUTIONS IN BIOLOGICAL STRUCTURES

In this paper we develop a system for modeling and measurement of magnetic field distributions in biological structures caused by the externally applied electromagnetic field. We describe an effective and versatile approach for three-dimensional reconstruction of the field distributions from two-dimensional visualization the measured magnetic field data. The finite element model for magnetic field calculation is built. The magnetic fields of very thin slices of the 3D object are determined and

I. Marinova, V. Mateev, H. Endo, Y. Saito

International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 262–278

Article

Research on Digital Modeling and Optimization of Virtual Reality Scene

the terminal computer to expand roaming and corresponding search and query in the virtual campus environment. This paper creates a virtual campus roaming system with functions such as panorama display, fixed path roaming, interactive roaming, collision detection response, and roaming system interaction from the aspects of OpenGL basic graphics element creation, rendering, and perspective conversion. The Z buffer algorithm is used to optimize 3d scenes and improve the modeling efficiency. II

Wenjing Xu, Pingping Liu, Zhaopan Lu

International Journal of Advanced Network, Monitoring and Controls , ISSUE 4, 69–76

Article

FAST RCS MODELING FOR DYNAMIC TARGET TRACKING

Radar scattering cross section (RCS) is an important parameter characteristic of exterior trajectory tracking system especially in moving state. The paper researches calculation method of RCS based on integral method from Maxwell equation, makes hybrid algorithm combined moment method and physical optics, by establishing the target modeling, uses FEKO to simulate the target RCS and complete fast modeling method research under static conditions. And then it discusses the accuracy of exterior

Xiang Hua, Wuwei Yuan, Bin Lei

International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 1956–1976

Research Article

ERROR MODELING AND COMPENSATION OF 3D SCANNING ROBOT SYSTEM BASED ON PSO-RBFNN

In order to improve the measurement accuracy of three-dimensional (3D) scanning robot, a method of 3D scanning robot system error modeling and compensation based on particle swarm optimization radial basis function neural network (PSO-RBFNN) is proposed to achieve intelligent compensation of measurement error. The structure, calibration and error modeling process of 3D scanning robot system are mainly described. Cleverly using the iterative closest point (ICP) algorithm to construct

Jianhong Qi, Jinda Cai

International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 837–855

Research Article

MODELING AND DESIGNING A FULL BEAMFORMER FOR ACOUSTIC SENSING AND MEASUREMENT

Acoustic sensing is a viable approach for solving issues related to many applications, namely, biomedical, distance measurements, mechanical, health infrastructure monitoring, etc. It is generally sustainable and of no negative impact on the object under test. The use of acoustic sensing under beamforming technique is an important asset to be exploited, especially for the aforementioned applications. This paper illustrates a generalized approach of modeling and designing a full beamfomer using

A. Lay-Ekuakille, N.I. Giannoccaro, S. Casciaro, F. Conversano, R. Velazquez

International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 718–734

Article

MODELING OF ENERGY CROPS GASIFICATION BASED ON EXPERIMENTAL DATA

Anna SKOREK-OSIKOWSKA, Wojciech UCHMAN, Sebastian WERLE

Architecture, Civil Engineering, Environment , ISSUE 3, 135–141

Article

THE USE OF ARTIFICIAL NEURAL NETWORKS IN THE ESTIMATION OF THE PERCEPTION OF SOUND BY THE HUMAN AUDITORY SYSTEM

through the modeling of the physical auditory system and the biological neural network of the primary auditory cortex using artificial neural networks. The behavior of artificial neural networks both during and after the training process has also been found to mimic that of biological neural networks and this method will be shown to have certain advantages over previous methods in the modeling of auditory perception. This work will describe the nature of artificial neural networks and investigate

D. Riordan, P. Doody, J. Walsh

International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 1806–1836

Research Communicate

THE WELLBEING EFFECT OF COMMUNITY DEVELOPMENT. SOME MEASUREMENT AND MODELING ISSUES

The two interconnected methodological tasks – measurement and modeling – become especially challenging in the context of exploration of the interaction between the local community development and individual wellbeing. In this paper, the preliminary results illustrate usefulness of an analytical framework aimed to assess an impact of the local development on individual wellbeing through multilevel modeling, accounting for spatial effects is. To this aim, a dual measurement system is

Włodzimierz Okrasa, Dominik Rozkrut

Statistics in Transition New Series , ISSUE 2, 359–376

Research Article

Study of the asynchronous traction drive's operating modes by computer simulation. Part 2: simulation results and analysis

. The description of methods applied in modeling of traction drive elements (traction motors, power converters, control systems), as well as of mechanical part and of "wheel-rail" contact, was given. In Part 2, the results of dynamic electromechanical processes modeling in various modes of electric locomotive operation (start and acceleration, traction regime in straight and curve railway sections, wheel-slide protection, etc.) are presented. In perspective, based on the developed model, the

Pavel KOLPAHCHYAN, Alexander ZARIFYAN Jr

Transport Problems , ISSUE 3, 5–15

Research Article

Modeling Host-Microbiome Interactions in Caenorhabditis elegans

humanized worm–microbiome interaction studies reveal metabolic and microbial–microbial interactions relevant in higher organisms. This article discusses recent developments in modeling the effects of host–microbiome interactions in C. elegans.

TEKLU K. GERBABA, LUKE GREEN-HARRISON, ANDRE G. BURET

Journal of Nematology , ISSUE 4, 348–356

Research Article

Study of the asynchronous traction drive's operating modes by computer simulation. Part 1: Problem formulation and computer model

at the realization of various control algorithms must be obtained. Another objective is to research the dynamic processes in various modes of the electric locomotive operation (start and acceleration, traction regime, coasting movement, wheel-slide protection, etc). To solve these problems, a complex computer model based on the representation of AC traction drive as controlled electromechanical system, is developed in Part 1. The description of methods applied in modeling of traction drive

Pavel KOLPAHCHYAN, Alexander ZARIFYAN Jr

Transport Problems , ISSUE 2, 125–136

Article

Modeling of High-Frequency Low Voltage Power Line Carrier Communication Channel

Li songnong, Liu Dong, Sun Hongliang, Hou Xingzhe, Zheng ke, Meng Xin, Luo Zhishu

International Journal of Advanced Network, Monitoring and Controls , ISSUE 4, 102–105

Article

MATHEMATICAL MODELING OF THE MOTION PARAMETERS OF A DISABLED PERSON IN A BUS

the curves of the change in coordinates of the angular velocity of the head and its center of gravity, as well as the curve of the change in the angle between the femur and the wheelchaior seat, through mathematical modeling and an experiment.

Jumber CHOGOVADZE, Phridon GOGIASHVILI, Gocha LEKVEISHVILI, David KBILASHVILI, Nodar MARDALEISHVILI

Transport Problems , ISSUE 1, 49–60

Article

MODELING OF THE CONTROLLED TRACTION POWER SUPPLY SYSTEM IN THE SPACE-TIME COORDINATES

Dmitry BOSYI, Yevhen KOSARIEV

Transport Problems , ISSUE 3, 5–19

Research Article

Extended Kalman Filtering and Pathloss modeling for Shadow Power Parameter Estimation in Mobile Wireless Communications

In this paper accurate estimation of parameters, higher order state space prediction methods and Extended Kalman filter (EKF) for modeling shadow power in wireless mobile communications are developed. Path-loss parameter estimation models are compared and evaluated. Shadow power estimation methods in wireless cellular communications are very important for use in power control of mobile device and base station. The methods are validated and compared to existing methods, Kalman Filter (KF) with

George P. Pappas, Mohamed A. Zohdy

International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 898–924

Article

IDENTIFICATION OF ELECTRO-HYDRAULIC ACTUATOR USING FRACTIONAL MODEL

Electro-hydraulic actuator (EHA system) identification is to describe the characteristic of the system that useful for prediction or control system design. There are numerous methods of EHA modeling but there has not been much model using fractional-order (FO) model. In this work, integer-order (IO) model and FO model are developed to model EHA system. Output-error method is used as the estimator for both model. The coefficient of IO model was first estimated and using the estimated coefficient

Nuzaihan Mhd Yusof, Norlela Ishak, Ramli Adnan, Yahaya Md. Sam, Mazidah Tajjudin, Mohd Hezri Fazalul Rahiman

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 32–48

Article

DESIGN AND IMPLEMENTATION OF INTELLIGENT INTEGRATED MEASURING AND CONTROLLING SYSTEM FOR SUGAR CANE CRYSTALLIZATION PROCESS

integrated measuring and controlling system is researched by this paper. The overall structure of this system is designed at first, and also the monitoring system of host computer is developed. Combining with data-driven modeling and hybrid modeling method, the intelligent soft-sensor component for sugar cane crystallization process is implemented. This system realizes automatic monitoring of sugar cane crystallization process, which includes on-line measurement of mother liquor supersaturation, mother

Yanmei Meng, Kangyuan Zheng, Wenxing Li, Haifeng Pang, Guancheng Lu, Guangquan Li

International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 1687–1705

Research Article

APPLICATION OF INTELLIGENT CONTROLLER IN A BALL AND BEAM CONTROL SYSTEM

mathematical modeling that includes the linearization of the model in order to be used with the linear controllers. The works followed with designing those controllers and simulating it in MATLAB. Each controller performance will be analyzed and compared which is based on common criteria’s of the step response. An appropriate graphic user interface (GUI) has been developed to view the animation of the ball and beam system.

Mohd Fuaad Rahmat, Herman Wahid, Norhaliza Abdul Wahab

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 45–60

Research Article

APPLICATION OF MULTI-FREQUENCY ELECTROMAGNETIC PROFILING IN STUDYING THE DISTRIBUTION OF BRONZE IN JINSHA RUIN WORSHIP

, the metal bodies underground can be detected based on the different conductivities of rocks and minerals in the crust. In the present paper, multi-frequency electromagnetic profiling was used to study the distribution of bronze in the sacrifice area of the Jinsha ruins, and the data were processed with multi electromagnetic dipole forward modeling. The distribution of bronze derived from multi-frequency electromagnetic profiling was in accordance with the results of site excavation, proving that

Wenfeng Zheng, Xiaolu Li, Nina Lam, Xuben Wang, Zhangli Sun, Shan Liu, Jinmei Yao

International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 733–751

Article

MODELING AND CONTROLLER DESIGN OF PNEUMATIC ACTUATOR SYSTEM WITH CONTROL VALVE

Pneumatic actuators offer several advantages over electromechanical and hydraulic actuators for positioning applications. Nonetheless, pneumatic actuators are subject to high friction forces, dead band and dead time, which make fast and accurate position control difficult to achieve. This research paper presents the process of controller identification, design, modeling and control for pneumatic actuator system. System Identification approach is used with the purpose to estimate the

W.K. Lai, M.F. Rahmat, N. Abdul Wahab

International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 624–644

research-article

Adolescent Friendship Formation and Mental Health: A Stochastic Actor-Based Model of Help-Seeking Behavior*

used statistical methods (Shalizi & Thomas, 2011). A recent analytical approach to the analysis of friendships and psychological counseling use is stochastic actor-based modeling (Snijders, van de Bunt, & Steglich, 2010), which allows for selection and influence effects in the same model. Stochastic actor-based modeling simulates the co-dependence of friendship formation and help-seeking behavior from an initial data state to a final data state while simultaneously accounting for social selection

Marlon P. Mundt, Larissa I. Zakletskaia

Journal of Social Structure , ISSUE 3, 50–69

original-paper

The Joint Effect of pH Gradient and Glucose Feeding on the Growth Kinetics of Lactococcus lactis CECT 539 in Glucose-Limited Fed-Batch Cultures

using empirical modeling. To validate the effectiveness of this modeling procedure, a second glucose-limited realkalized fed-batch culture in DW medium was carried out by using the CMPW medium supplemented with glucose and KH2PO4 up to concentrations of 400 g glucose/l and 3.21 g total phosphorus/l as feeding medium. Experimental Materials and Methods Bacterial strains and culture media. The LAB strains used in this study were selected as the best nisin producer (Lactococcus lactis CECT 539) and

MÓNICA COSTAS MALVIDO, ELISA ALONSO GONZÁLEZ, RICARDO J. BENDAÑA JÁCOME, NELSON PÉREZ GUERRA

Polish Journal of Microbiology , ISSUE 2, 269–280

Research paper

MULTINOMIAL LOGISTIC REGRESSION APPROACH FOR THE EVALUATION OF BINARY DIAGNOSTIC TEST IN MEDICAL RESEARCH

Evaluating the effect of variables on diagnostic measures (sensitivity, specificity, positive, and negative predictive values) is often of interest to clinical researchers. Logistic regression (LR) models can be used to predict diagnostic measures of a screening test. A marginal model framework using generalized estimating equation (GEE) with logit/log link can be used to compare the diagnostic measures between two or more screening tests. These individual modeling approaches to each diagnostic

Alok Kumar Dwivedi, Indika Mallawaarachchi, Juan B. Figueroa-Casas, Angel M. Morales, Patrick Tarwater

Statistics in Transition New Series , ISSUE 2, 203–222

Article

INFORMATION SUPPORT OF DECISION MAKING IN URBAN PASSENGER TRANSPORT MANAGEMENT

In this paper, we examine the problems of simulating modeling of urban transport route network operation and development of an information system for automating the process of modeling and processing of simulation results with SIMUL8 software. In order to solve this problem, it is required to solve the following set of related tasks: formal description of the urban transport systems structure and parameters of its functioning, development of mathematical models of urban transport network

Vladimir NEMTINOV, Yulia NEMTINOVA, Andrey BORISENKO, Vladimir MOKROZUB

Transport Problems , ISSUE 4, 83–90

Article

Compositional Equivalence with Actor Attributes: Positional Analysis of the Florentine Families Network

This paper extends Compositional Equivalence – which is a structural correspondence type intended for multiplex networks – by incorporating actor attributes in the modeling of the network relational structure as diagonal matrices. As an illustration, we construct the positional system of the Florentine families network with Business and Marriage ties together with relevant characteristics acquired from the actors such as the families’ financial Wealth and the number of Priorates they held

J. Antonio Rivero Ostoic

Connections , ISSUE 1-2, 53–68

Article

SIMULTANEOUS PERIODIC OUTPUT FEEDBACK CONTROL FOR PIEZOELECTRIC ACTUATED STRUCTURES USING INTERVAL METHODS

In this paper, the problem of modeling, output feedback control design and the experimental implementation for the vibration control of smart cantilever beam with parameter uncertainties represented in interval form is addressed. The interval model of the system is obtained by introducing variation in the parameter of the identified model. However, Uncertainties are assumed in the model, identified through on line recursive least square parameter estimation. The control and identification

S. Neduncheliyan, M. Umapathy, D. Ezhilarasi

International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 417–431

research-article

A Relational Hyperlink Analysis of an Online Social Movement

markedly different to the other approaches (in particular, webmetrics). We utilize a particular class of statistical models for social network analysis (SNA), named exponential random graph modeling or ERGM (Frank and Strauss 1986; Wasserman and Pattison 1996; Pattison and Wasserman 1999; and Robins, Pattison and Wasserman 1999) to explicitly test for the existence of “structural signatures” (Faust and Skorvetz 2002; Skorvetz and Faust 2002) in the hyperlink networks formed on the web for coordinated

Dean Lusher, Robert Ackland

Journal of Social Structure , ISSUE 1, 1–49

Article

Research on Blockchain Availability Modeling in P2P Network

development trend of p2p network, the demand of modeling and verification evaluation on the availability of p2p network is more and more common and urgent. The establishment of high availability network is the basis of accurate and timely information exchange, so as to meet the demand of network system to provide high reliable services for various users. II. RELATED WORK The traditional concept of availability is a typical measure of reliability in reliability theory. It is an important parameter in

Zan Wang, Yanfang Fu, Lianjiong Zhong, Fei Dai

International Journal of Advanced Network, Monitoring and Controls , ISSUE 1, 36–43

Article

THE EFFECTS OF LUMBER SEASONAL GROWTH RINGS ON MICROWAVE MEASUREMENTS

modeling and industrial wood quality testing.

W.S Holmes, G. Emms, S.C. Mukhopadhyay

International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, –

Research Article

Effects of Seasonal Growth Rings on the Microwave Measurement of Wood

propagation modeling and industrial wood quality testing.

W.S. Holmes, M. Bogosanović, G. Emms, S.C. Mukhopadhyay

International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 1–6

Research paper

KNOWLEDGE-BASED MODELING FOR PREDICTING CANE SUGAR CRYSTALLIZATION STATE

Yanmei Meng, Xian Yu, Haiping He, Zhihong Tang, Xiaochun Wang, Jian Chen

International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 942–965

Article

AN ELECTRICAL MODEL OPTIMIZATION FOR SINGLE CELL FLOW IMPEDANCE SPECTROSCOPY

J. Claudel, M. Nadi, O. Elmazria, D. Kourtiche

International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 526–536

research-article

Intelligent agent for formal modelling of temporal multi-agent systems

of real-time software systems has led to a new category of software systems called self-adaptive software system. These self-adaptive systems possess the necessary knowledge to adapt their behavior in response to environmental context. In the studies of Tesar (2016), Nair et al. (2015), De Lemos et al. (2013), it has been argued that the development of autonomous physical systems with real-time constraints is a challenging task. Formal modeling corresponds to constructing a mathematical

Awais Qasim, Zeeshan Aziz, Syed Asad Raza Kazmi, Adnan Khalid, Ilyas Fakhir, Jawad Hassan

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 1–13

Article

SENSOR PERFORMANCE OF CANTILEVERED MAGNETOSTRICTIVE BEAM

A nonlinear couple modeling of magnetostrictive cantilever is built by combining Gibb’s free energy formulation with the Euler-Bernoulli beam theory. The Gibb’s free energy corresponding to different orientations in 3D space can be expressed in terms of their direction cosines, the stress at a given point can be described by classical theory. The magnetomechanical bending experimental setup is designed. The results demonstrated magnetostrictive sensing can be performed in bending even when both

Cao Qinghua, Chen Dingfang, Lu Quanguo, Tang gang, Yan Jianwu, Zhu Zhifang, Xu Bin, Zhao Ran, Zhang Xiaoxing

International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 1221–1238

Article

Construction and Visualization of 3D Landscape

In order to know the operation condition before working, and reduce the risk of serious accidents of coal production industry. In this paper, by analyzing the characteristics of the environment of underground mine, using virtual reality technology, combined with the 3d Max modeling techniques and VC++ calling the OpenGL graphics interface techniques, the models are well optimized based on progressive mesh LOD algorithm for edge collapse. Using high-tech computer technology to simulate realistic

Pingping Liu, Zhaopan Lu

International Journal of Advanced Network, Monitoring and Controls , ISSUE 3, 1–5

Research Article

CEMENT TRANSPORTATION LIMITED-FLEET MODELING AND ASSIGNING TO RATED DEMANDS

Narjes MASHHADI BANDANI, Alireza NADERI, Mohsen AKBARPOUR SHIRZAEI

Transport Problems , ISSUE 1, 111–123

Article

DSM Modelling for Digital Design Using Verilog HDL

Xing Xue, Yao Chen, Junchao Wei

International Journal of Advanced Network, Monitoring and Controls , ISSUE 1, 59–64

Article

The Research and Implementation of 3D Scene Simulation of Camouflage

Yu Jun, Li Zhonghua, Hu Zhiyi, Dai Jun

International Journal of Advanced Network, Monitoring and Controls , ISSUE 1, 126–129

Research Article

APPLICATION OF DRAW WIRE SENSOR IN POSITION TRACKING OF ELECTRO HYDRAULIC ACTUATOR SYSTEM

Draw-wire sensor is classified as a contact measurement method. This sensor is ideal for applications with large measuring ranges, small sensor dimensions and when a low cost solution is required. The objective of this research is to explain the application of a draw-wire sensor in position tracking of electro-hydraulic actuator system. The work started with the modeling of the electro hydraulic actuator system. Draw wire sensor is attached to the load of electro hydraulic system to measure its

MF Rahmat, S Md Rozali, N Abdul Wahab, Zulfatman

International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 736–755

Research Article

INFLUENCE OF IMPLEMENTATION OF TECHNOLOGICALLY ADVANCED EVACUATION MODELS ON THE PROCESS OF DECREASING THE RISK DURING ACCIDENTS IN AN LNG TERMINAL

Summary. The continuing growth of the LNG (liquid natural gas) industry has led to a rapid increase in the construction of LNG terminals and the need for accurate risk assessment models as accidents involving LNG are potentially hazardous and pose a major threat. One aspect of risk modeling - evacuation of people to the safe zones of an LNG terminal - is a complex problem that has yet to receive sufficient attention. The aim of this paper is to illustrate how the implementation of a

Goran STANKOVIĆ, Stojan PETELIN, Peter VIDMAR, Marko PERKOVIČ

Transport Problems , ISSUE 1, 25–38

Article

SPRING-LOADED BATCHER

how it is related to vibration frequency and amplitude. The results of mathematical modeling and experimental analysis based on laser holographic interferometry are presented.

Vytenis NAGINEVIČIUS, Dalius KALISINSKAS, Skirmantas ADOMAVIČIUS

Transport Problems , ISSUE 4, 51–59

Article

UAV Dynamic Simulation Model Establishment Method Based on Simulink/Aerosim

Aiming at the problem of UAV dynamic modeling with high difficulty and poor timeliness, a UAV dynamic model based on Simulink/Aerosim rapid method is established in this paper. Based on the analysis of UAV system internal structure, using Simulink/Aerosim toolbox to build six degrees of freedom dynamic simulation model of unmanned aerial vehicle and the setting of relevant parameters and RTW environment configuration process is analyzed, finally, by analyzing the typical flight parameters of a

Chen GuoShao, Yang Sen

International Journal of Advanced Network, Monitoring and Controls , ISSUE 1, 29–37

research-article

Target Characterization Using MIMO Radar

Samarendra Nath Sur, Soumyasree Bera, Subhankar Shome, Rabindranath Bera, Bansibadan Maji

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 1–8

Research Article

DATA MINING WITH BIG DATA REVOLUTION HYBRID

-driven model involves demand-driven aggregation of information sources, mining and analysis, user interest modeling, and security and privacy considerations. We analyze the challenging issues in the data-driven model and also in the Big Data revolution.

R. Elankavi, R. Kalaiprasath, R. Udayakumar

International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 560–573

Article

SIMULATION OF DYNAMIC PROCESSES OF INTERACTION OF CAR AND RAILWAY TRACK DURING TRAIN PASSAGE OF CURVED SECTIONS OF THE TRACK

design schemes of freight car truck, mathematical modeling of systems dynamics, "crew-track" safety of freight car movement and withdrawal under different technical conditions of running parts and track are considered in this work.

Gabit BAKYT, Seidulla ABDULLAYEV, Nurgul SULEYEVA, Amandyk YELSHIBEKOV, Zhanerke SEIDEMETOVA, Zhadyra SADVAKASSOVA

Transport Problems , ISSUE 2, 59–70

Research Article

TEMPERATURE CONTROL OF A CONTINUOUS STIRRED TANK REACTOR BY MEANS OF TWO DIFFERENT INTELLIGENT STRATEGIES

Mohd Fua’ad Rahmat, Amir Mehdi Yazdani, Mohammad Ahmadi Movahed, Somaiyeh Mahmoudzadeh

International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 244–267

Article

FOREGROUND DETECTION IN SURVEILLANCE VIDEOS VIA A HYBRID LOCAL TEXTURE BASED METHOD

Xiaojing Du, Guofeng Qin

International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 1668–1686

Article

Application of Greedy Random Adaptive Search Algorithm (GRASP) in Flight Recovery Problem

Wang Shaochang, Xu Fei, Yang Weixia, Ma Zhe

International Journal of Advanced Network, Monitoring and Controls , ISSUE 1, 39–44

Article

FORECASTING OF THE ROUTE NETWORK OF FERRY AND CRUISE LINES BASED ON SIMULATION AND INTELLIGENT TRANSPORT SYSTEMS

Nikolai MAIOROV, Vladimir FETISOV, Srećko KRILE, Darijo MISKOVIC

Transport Problems , ISSUE 2, 111–121

Article

Optimal Waveform Design for Smart Jamming Focused on CA-CFAR

interference region is designed as dense false targets region and sparse false targets region. Through modeling and simulation of CA-CFAR and smart jamming, the method of designing optimal waveform is explored, which will provide reference for other related waveform design.

Xia Xingyu, Yan Li, Hao Daoliang, Wang Xiaoyang

International Journal of Advanced Network, Monitoring and Controls , ISSUE 4, 80–84

Research Article

Modeling Patterns of Negative Life Events and Mental Health in Faroese Adolescents

Tóra Petersen, Cherie Armour, Ask Elklit

Scandinavian Journal of Child and Adolescent Psychiatry and Psychology , ISSUE 2, 63–71

Article

Study on Modeling and Simulation of Logistics Sorting System Based on Flexsim

Fan Zhang, Chun Tian

International Journal of Advanced Network, Monitoring and Controls , ISSUE 4, 199–201

Research Article

Modeling and Prediction of Surface Water Contamination using On-line Sensor Data

Tochukwu K. Anyachebelu, Marc Conrad, Tahmina Ajmal

International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 1–5

Research Article

Signature Extraction from 3D Point Clouds using Frame Theory for Environmental Modeling

Fabio Martino, Cosimo Patruno, Roberto Marani, Ettore Stella

International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 1–6

Article

ADVANCED COMPUTATIONAL METHODS IN COMPONENT-ORIENTED MODELLING OF MUNICIPAL SOLID WASTE INCINERATION PROCESSES

Krzysztof GASKA, Agnieszka GENEROWICZ

Architecture, Civil Engineering, Environment , ISSUE 1, 117–130

Article

EFFECTS OF RAIL-WHEEL PARAMETERS ON VERTICAL VIBRATIONS OF VEHICLES USING A VEHICLE–TRACK-COUPLED MODEL

Stasys STEIŠŪNAS, Gintautas BUREIKA, Mykola GORBUNOV

Transport Problems , ISSUE 3, 27–40

research-article

Modeling and experimental validation of the hysteretic dynamics of shape memory alloy springs

of modeling its dynamic process is still under the spotlight. Claire Morin et al. (2011) introduced a model with the name Zaki–Moumni (ZM) model. Here stain rate induced by the mechanical pseudoelasticity is considered, but the achievement is only at a high strain rate probably due to localization effect. Wang et al. (2017) developed a constitute model for simulation of SMA Nitinol at different loading rates. The model is described by cyclic pseudoelasticity of polycrystalline SMAs. But the

R. A. Abubakar, Yutian Hu, Fan Wang, Linxiang Wang

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 1–10

Research Article

DETERMINATION OF RATIONAL PARAMETERS FOR URBAN BUS ROUTE WITH COMBINED OPERATING MODE

the implementation of the mixed high-speed conveyance forms. A structure of the integrated efficiency index has been proposed helping select the best approach, and involving the basic economic, technological, and social indices. The modeling outcomes as well as performance efficiency, resulting from the implementation of a high-speed conveyance in the context of an urban route, have been represented.

Igor TARAN, Vadim LITVIN

Transport Problems , ISSUE 4, 158–171

Research Article

RANGED SUBGROUP PARTICLE SWARM OPTIMIZATION FOR LOCALIZING MULTIPLE ODOR SOURCES

subgroup locates one odor sources. This is inefficient because other subgroups locate other source, then we proposed a ranged subgroup method for coping for that problem, then the searching performance will increase. Finally ODE (Open Dynamics Engine) library is used for physical modeling of the robot like friction, balancing moment and others so that the simulation adequate to accurately address the real life scenario.

W. Jatmiko, W. Pambuko, A. Febrian, P. Mursanto, A. Muis, B. Kusumoputro, K. Sekiyama, T. Fukuda

International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 411–442

Research Article

Hybrid Intelligent Method of Identifying Stator Resistance of Motorized Spindle

Aiming at the problem that changes of nonlinear dynamic resistance of stator affect the performance of speed sensorless vector control system, a hybrid computing intelligence approach is used in the identification of stator resistance of motorized spindle. The partial least squares (PLS) regression is combined with neural network to solve the problem of few samples and multi-correlation of variables in complicated data modeling. The PLS method is used to extract variable components from sample

Lixiu Zhang, Yuhou Wu, Ke Zhang

International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 781–797

Article

RANDOM SIGNAL FREQUENCY IDENTIFICATION BASED ON AR MODEL SPECTRAL ESTIMATION

achieve greatly improvement, which is a great importance for improving the accuracy of the power spectral estimation. This paper mainly studies AR model of parametric modeling in the modern spectral estimation, and then uses the simulation between the classical power spectral estimation and modern power spectral estimation for comparison, verifies the analysis of the modern power spectral estimation based on ARmodel is more accurate than the classical power spectral estimation.

Chunhuan Song

International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 884–908

Article

VISUALIZATION TECHNOLOGY OF THE MICROSTRUCTURE OF RESERVOIR CORE

To solve the problem in conventional technologies of analysis and integration in micro scale of reservoir core, virtual reality and visualization technology can be used in the research of reservoir core microstructure. Integrated with practical research and application works, the modeling method of reservoir core and the database store method of microstructure model are analyzed and discussed. A skeleton extraction algorithm based on maximum circumsphere method is proposed to achieve the

Niu Wenjie, Xu Qingqing, Xu Ying, Xu Guohui, Wang Xiaobin, Zheng Shipo, Liu He

International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 1479–1496

Article

FORECASTING THE OPERATIONAL ACTIVITIES OF THE SEA PASSENGER TERMINAL USING INTELLIGENT TECHNOLOGIES

Srećko KRILE, Nikolai MAIOROV, Vladimir FETISOV

Transport Problems , ISSUE 1, 27–36

Research Article

DEALING WITH HETEROSKEDASTICITY WITHIN  THE MODELING OF THE QUALITY OF LIFE  OF OLDER PEOPLE

Katarzyna Jabłońska

Statistics in Transition New Series , ISSUE 3, 423–452

Article

MODELING AND CONTROLLER DESIGN FOR THE VVS-400 PILOT SCALE HEATING AND VENTILATION SYSTEM

M.F. Rahmat, N.A. Mohd Subha, Kashif M.Ishaq, N. Abdul Wahab

International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 579–601

Article

ANALYSIS OF FORMING TREAD WHEEL SETS

This paper shows the results of a theoretical study of profile high-speed grinding (PHSG) for forming tread wheel sets during repair instead of turning and mold-milling. Significant disadvantages of these methods are low capacity to adapt to the tool and inhomogeneous structure of the wheel material. This leads to understated treatment regimens and difficulties in recovering wheel sets with thermal and mechanical defects. This study carried out modeling and analysis of emerging cutting forces

Igor IVANOV, Dmitrii EVSEEV, Irina OVSYANIKOVA, Alexander TARAPANOV

Transport Problems , ISSUE 3, 35–42

Article

MODELING AND OPTIMAL SUPERVISION OF MULTISENSORS AND MULTI-STATES DISCRETE-EVENT SYSTEMS WITH STRUCTURED LANGUAGES

Shunping Ji

International Journal on Smart Sensing and Intelligent Systems , ISSUE 4, 2010–2031

Research Article

RESEARCH OF TRAFFIC PREDICTION ACCURACY INFLUENCE ON THE EFFECTIVENESS OF TRAINS BREAKING-UP ORDER CONTROL

approaches, as well as costs associated with additional shunting work. With the help of simulation modeling the dependence was obtained, describing the impact of trains’ arrival forecasting error and processed car volumes on reducing operating costs of the marshalling yards through the trains’ breaking-up order control. The studies enable us to establish the requirements for the accuracy of information support of operational planning tasks, which is necessary to achieve the desired economic effect of the

Oleksandr BARDAS, Ihor SKOVRON, Yevhen DEMCHENKO, Andrii DOROSH

Transport Problems , ISSUE 1, 151–158

Article

PREDICTION AND VALIDATION FOR THE AERODYNAMIC NOISE OF HIGH-SPEED TRAIN POWER CAR

the transient model. Considering the transient flow field, the far-field aerodynamic noise generated by the power car was finally derived from Lighthill-Curle theory. It was validated by means of on-line tests that have been performed along a real high-speed railway line. Through comparisons between simulations and measurements, it is shown that the simulation model gives reliable aerodynamic noise predictions. We foresee numerous applications for modeling and control of the aerodynamic noise in

Shi-jie Jiang, Song Yang, Dan Wu, Bang-Chun Wen

Transport Problems , ISSUE 2, 91–102

Article

A KRIGING-BASED UNCONSTRAINED GLOBAL OPTIMIZATION ALGORITHM

optimal searching direction into more promising regions. Kriging modeling which can fast construct an approximation model is the premise of performing optimization. Next, a new infill sampling criterion (ISC) called improved generalized expected improvement which round off Euclidean norm on variation of the optimal solutions of parameter θ to replace parameter g can effectively balance global and local search in IGEGO method. Twelve numerical tests and an engineering example are given to illustrate

Yaohui Li

International Journal on Smart Sensing and Intelligent Systems , ISSUE 2, 927–952

research-article

Dynamics of Social Networks Following Adolescent Pregnancy

change. To better take into account the influence of the whole network structure on friendship and behavioral decisions, I explore network evolution of select schools using stochastic actor oriented models (SAOM), which simultaneously model changes in actors’ network positions and attributes (e.g. pregnancy) across time (Snijders, van de Bunt, & Steglich, 2010). Although this strategy is able to control for network influences, which are not accounted for in other modeling techniques, the models

Elizabeth Humberstone

Journal of Social Structure , ISSUE 1, 1–34

Original Paper

Modeling alloantibody formation to highincidence red blood cell antigens in immune responders using genotypic data  

Patricia A.R. Brunker, Keerthana Ravindran, R. Sue Shirey

Immunohematology , ISSUE 1, 9–14

Article

RESEARCH ON POWER CHARACTERISTIC OF THE ELECTRIC FORKLIFT EPS SYSTEM

Yan He, Benxian Xiao

International Journal on Smart Sensing and Intelligent Systems , ISSUE 3, 1768–1785

Article

MODELING AND CONTROL OF BALL AND BEAM SYSTEM USING MODEL BASED AND NON-MODEL BASED CONTROL APPROACHES

Mohammad Keshmiri, Ali Fellah Jahromi, Abolfazl Mohebbi, Mohammad Hadi Amoozgar, Wen-Fang Xie

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 14–35

Research Article

Results of Simulation and Physical Modeling of the Computerized Monitoring and Control System for Greenhouse Microclimate Parameters

I. S. Laktionov, O. V. Vovna, A. A. Zori, V. A. Lebedev

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 1–15

Research Article

Structural Balance and Signed International Relations

problems for studying signed networks, regardless of whether they involve nations or human actors, were raised and addressed. Proposals for future research are suggested for modeling and understanding the dynamics of signed networks.

Patrick Doreian, Andrej Mrvar

Journal of Social Structure , ISSUE 1, 1–49

Article

MODELING OF PASSENGERS’ CHOICE USING INTELLIGENT AGENTS WITH REINFORCEMENT LEARNING IN SHARED INTERESTS SYSTEMS; A BASIC APPROACH

Sergey VIKHAREV, Maxim LYAPUSTIN, Danil MIRONOV, Irina NIZOVTSEVA, Vladimir SINITSYN

Transport Problems , ISSUE 2, 43–53

Research Article

A VERSATILE LATTICE BASED MODEL FOR SITUATION RECOGNITION FROM DYNAMIC AMBIENT SENSORS

Sangeeta Mittal, Krishna Gopal, S.L. Maskara

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 403–432

Article

OSGi-Based Context-Aware Middleware for Building Intelligent Services in a Smart Home Environment

. However, these data are used by context awareness system to analysis and process, so as to realize different person in different environment using every kind of devices and through any different existing network system, and still could enjoy the personality applications and services in any time they want. This thesis proposed Intelligent Context-Aware Middleware is including system core modeling, context provider, context analysis model, reasoning system, scenario analysis model and some other APIs to

SHU-CHEN CHENG, CHIEN-FENG LAI

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 135–155

Article

GENERATING AND MODELING OF BRAKING CURVE AND THE ASSESSMENT OF THE QUALITY OF AUTOMATIC STOPPING OF THE TRAIN

Jan Anuszczyk, Andrzej Gocek, Krzysztof Pacholski, Bartosz Dominikowski

Transport Problems , ISSUE 2, 13–25

Article

A TWO-COMPONENT NORMAL MIXTURE ALTERNATIVE TO THE FAY-HERRIOT MODEL

This article considers a robust hierarchical Bayesian approach to deal with random effects of small area means when some of these effects assume extreme values, resulting in outliers. In the presence of outliers, the standard Fay-Herriot model, used for modeling area-level data, under normality assumptions of random effects may overestimate the random effects variance, thus providing less than ideal shrinkage towards the synthetic regression predictions and inhibiting the borrowing of

Adrijo Chakraborty, Gauri Sankar Datta, Abhyuday Mandal

Statistics in Transition New Series , ISSUE 1, 67–90

Article

RESEARCH ON LONGITUDINAL CONTROL ALGORITHM FOR FLYING WING UAV BASED ON LQR TECHNOLOGY

Yibo Li, Chao Chen, Wei Chen

International Journal on Smart Sensing and Intelligent Systems , ISSUE 5, 2155–2181

Research Article

FEED FORWARD LINEAR QUADRATIC CONTROLLER DESIGN FOR AN INDUSTRIAL ELECTRO HYDRAULIC ACTUATOR SYSTEM WITH SERVO VALVE

Electro-hydraulic servo actuator (EHA) system consists of several dynamic parts which are widely used in motion control application. These dynamic parts need to be controlled to determine direction of the motion. In this research paper, system identification technique is used for system modeling and the model of the system is estimated by using parameter estimation technique. This process started with collection of input and output data from experimental procedure. The data collected is used

J. Micheal, M.F. Rahmat, N. Abdul Wahab, W.K. Lai

International Journal on Smart Sensing and Intelligent Systems , ISSUE 1, 155–170

Research Article

Choosing the ‘ß' Parameter When Using the Bonacich Power Measure

Bonacich (1987) suggested a family of centrality measures that provide a useful way of modeling questions of power and network constraint. However, the literature offers little guidance regarding the choice of ß, the parameter which alters the way the measure accounts for the effect of having powerful contacts in ones network. In this paper I explore the way the choice of the ß parameter affects the power indices the Bonacich measure generates. I consider three network

Simon Rodan

Journal of Social Structure , ISSUE 1, 1–23

research-article

Cyberbullying: relationship with developmental variables and cyber victimization

= 0.70). The latter was used to measure repressive emotion in the present study. Analyses The proposed model was analyzed by the structural equation modeling (SEM) in LISREL 8.71. Before the analysis, the data were examined for the assumptions of SEM. The two-stage approach in which the measurement and the structural models are tested separately was preferred in SEM (76). Sample size, missing values, outliers, multicollinearity, linearity and homoscedasticity assumptions were met. Since the data

Gülendam Akgül, Müge Artar

Scandinavian Journal of Child and Adolescent Psychiatry and Psychology , 25–37

research-article

NUMERICAL MODELLING OF UNDERVENTILATED FIRE IN A COMPARTMENT

, and concentrations every 0.5 m. Table 1. Considered cases Air inlet Case 1 inlet A Case 2 inlet A, B Case 3 inlet A, B, C 4. NUMERICAL MODEL OF THE COMPARTMENT 4.1. Numerical modeling of combustion processes The process of combustion which includes chemical reactions between the components of the fuel and the oxidant with the formation of various intermediate and final products and the release of large amounts of energy is a very complex phenomenon. This is why some

Małgorzata KRÓL, Aleksander KRÓL

Architecture, Civil Engineering, Environment , ISSUE 2, 115–123

Research Article

Probabilistic Approach for the Determination of Cuts Permissible Braking Modes on the Gravity Humps

norms of probable exceeding of permissible speed of cars collision and their stop in retarders. As a criterion for evaluating the modes of interval control of cuts rolling speed, using the risk of their non-separation on the switches was proposed. Using the simulation modeling and mathematical statistics, the configuration of the range of permissible speed of cuts coming out from retardant positions has been set. The conducted researches allow simplifying the choice of cut braking modes in systems

Volodymyr BOBROVSKYI, Dmytro KOZACHENKO, Andrii DOROSH, Evhen DEMCHENKO, Tetiana BOLVANOVSKA, Anton KOLESNIK

Transport Problems , ISSUE 1, 147–155

research-article

Alteration of oxidative stress markers and behavior of rats in a novel model of depression

Anna Gorlova, Dmitrii Pavlov, Eugene Zubkov, Yana Zorkina, Anatoly Inozemtsev, Anna Morozova, Vladimir Chekhonin

Acta Neurobiologiae Experimentalis , ISSUE 3, 232–238

Article

INLAND WATER TRANSPORT APPLICABILITY FOR SUSTAINABLE SEA PORT HINTERLAND INFRASTRUCTURE DEVELOPMENT. KLAIPEDA SEA-PORT CASE

modeling of traffic flows is proved that, road transport highway connection in/from the Klaipeda Seaport is loaded substantially and requires systemic improvement (building at least additional lanes in both directions, etc.) to promote further growth of Klaipeda sea-port capacities. The option to apply an additional inland waterway connection allows to decrease the road traffic flow up to 9 – 11% with the possible development of this option, what in its’ turn also decrease the negative

Ričardas MALKUS, Jūratė LIEBUVIENĖ, Vida JOKUBYNIĖNĖ

Transport Problems , ISSUE 2, 25–31

No Record Found..
Page Actions