• Select Article Type
  • Abstract Supplements
  • Blood Group Review
  • Call to Arms
  • Hypothesis
  • In Memoriam
  • Interview
  • Introduction
  • Letter to the Editor
  • Short Report
  • abstract
  • Abstracts
  • Article
  • book-review
  • case-report
  • case-study
  • Clinical Practice
  • Commentary
  • Conference Presentation
  • conference-report
  • congress-report
  • Correction
  • critical-appraisal
  • Editorial
  • Editorial Comment
  • Erratum
  • Events
  • Letter
  • Letter to Editor
  • mini-review
  • minireview
  • News
  • non-scientific
  • Obituary
  • original-paper
  • original-report
  • Original Research
  • Pictorial Review
  • Position Paper
  • Practice Report
  • Preface
  • Preliminary report
  • Product Review
  • rapid-communication
  • Report
  • research-article
  • Research Communicate
  • research-paper
  • Research Report
  • Review
  • review -article
  • review-article
  • review-paper
  • Review Paper
  • Sampling Methods
  • Scientific Commentary
  • short-communication
  • short-report
  • Student Essay
  • Varia
  • Welome
  • Select Journal
  • In Jour Smart Sensing And Intelligent Systems
  • International Journal Advanced Network Monitoring Controls
  • Australasian Orthodontic Journal


Article | 01-September-2015

Classification of artificial light sources and estimation of Color Rendering Index using RGB sensors, K Nearest Neighbor and Radial Basis Function

Three types of artificial light sources work with electricity: incandescent, fluorescent and LED. These sources require characterization processes to allow selecting the most suitable for the application, to evaluate their capacity or more recently to tune and adjust their replicability using control algorithms. Therefore, it has been necessary to develop indices that represent these capabilities. The Color Rendering Index (CRI) is a measure used to characterize the color reproducibility of a

J.-S. Botero V., F.-E. López G., J.-F. Vargas B.

International Journal on Smart Sensing and Intelligent Systems, Volume 8 , ISSUE 3, 1505–1524

Article | 01-June-2016


such measurements to study light sources. Finally, this newly developed method helps studying the behavior of a photodetector in detail; hence, it enables the derivation of photometric measurements from known data or simulations.

J.-S. Botero V., F.-E. López G., J.-F. Vargas B.

International Journal on Smart Sensing and Intelligent Systems, Volume 9 , ISSUE 2, 752–764

research-article | 30-November-2020

Pulp chamber temperature changes during orthodontic bonding – an in vitro study

generate excessive heat in the irradiated object.4 In this regard, the generated temperature rise may have detrimental effects on the dental pulp.5 Several investigations have shown a significant temperature increase within the pulp chamber accompanying the application of high-energy light sources.6,7 The temperature rise depends on the light source, exposure time, the thickness of the adhesive layer, and the distance between the light unit and the pulp.8 There has been a clinical aim to reduce the

Aysegul Ayhan Bani, Burcu Balos Tuncer, Cumhur Tuncer

Australasian Orthodontic Journal, Volume 37 , ISSUE 2, 157–164

Article | 05-June-2013

LT-PAM: A Ranging Method Using Dual Frequency Optical Signals

experiments using two types of light sources, collimated and diffused light. The experimental results indicated that the proposed method showed a moderate level of accuracy by adjusting the measurement time. For example, LT-PAM using a light emitting diode transmitting multiple sync patterns lasting 4 ms achieved 19.5 mm standard deviation in a measurement ranging 1500 mm. We also describe the theoretical analyses related to the proposed technique and discuss possible improvements by comparing theoretical

Masanori Sugimoto, Shigeki Nakamura, Yuki Inoue, Hiromichi Hashizume

International Journal on Smart Sensing and Intelligent Systems, Volume 6 , ISSUE 3, 791–809

Article | 01-April-2018

The Effect of Residual Stress on Coupling Power Loss of VCSEL Modulus

In this article,the effect of residual stress on active region misalignmentof laser light sources for vertical cavity surface emitting laser (VCSEL)modulus has been studied.The post-weld-shift variation of active region introduced from the residual stress distribution variation for different VCSELsolder joints, i.e. tin-silver (Sn/3.5Ag) and tin-lead (Sn/37Pb) solder joints,a resimulated by employing the thermal-elastic-plastic finite element model of MARC package.The ball grid solidification

Jao-Hwa Kuang, Chao-Ming Hsu, Ah-Der Lin, Jyun-Wei Luo

International Journal of Advanced Network, Monitoring and Controls, Volume 1 , ISSUE 1, –

Article | 01-December-2012


This paper reviews some of the recent applications of optical tomography as a measurement tool for process parameters measurement such as flow concentration profiles, velocity profiles, and mass flow rate. The attentions that have been received by the optical tomography system for the applications of industrial parameters measurement are mainly because of the radiation safe emission of light sources to human or environment, fast response time, non-intrusive technique, and established models of

M. T. M. Khairi, S. Ibrahim, M. A. M. Yunus, M. Faramarzi

International Journal on Smart Sensing and Intelligent Systems, Volume 5 , ISSUE 4, 767–798

No Record Found..
Page Actions