Silesian University of Technology
Subject: Economics, Transportation, Transportation Science & Technology
eISSN: 2300-861X
SEARCH WITHIN CONTENT
Igor IVANOV / Pavel RUBIN * / Alexander TARAPANOV / Nikita KANATNIKOV
Keywords : driving gear reliability, resource of driving gear, tooth gearing durability, arched tooth, cutting processing
Citation Information : Transport Problems. Volume 11, Issue 2, Pages 61-66, DOI: https://doi.org/10.20858/tp.2016.11.2.6
License : (CC BY-SA 4.0)
Received Date : 27-April-2015 / Accepted: 01-June-2016 / Published Online: 02-February-2017
Summary. In this article, one of the most promising methods of increasing the operational characteristics of a vehicle gear by the use of cylindrical gear drives with arched teeth is presented. Despite a number of advantages, these gearings are not widely used due to design and manufacture complexity. Possible options of edge cutting machining of cylindrical gearwheel arched teeth are considered. The progressive process technology proposed by the authors combines the roughing by multi-purpose cutter head for bevel gear with circular tooth and finishing by cutter head with zero angle of cutting edge.
Glover, R. Design of High Speed Gears, Low Load Gears for Minimizing Gear Whine Noise. ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. 2013. P. V005T11A020-V005T11A020.
Inoue, S. & Ikejo, K. & Nagamura, K. & Seyama N. & Nakagawa, S. A Prediction Method of Wear on Tooth Surface for Spur Gears. ASME 2013 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. 2013.
P. V005T11A032-V005T11A032.
Chong, T.H. & Inho, B.A.E. & Kubo, A. Multiobjective Optimal Design of Cylindrical Gear Pairs for the Reduction of Gear Size and Meshing Vibration. JSME International Journal Series C Mechanical Systems, Machine Elements and Manufacturing. 2001. Vol. 1. P. 291-298.
Плахтин, В.Д. & Давыдов, А.П. & Паршин А.Н. Разработка методов анализа и синтеза зацепления арочных цилиндрических зубчатых колес и технологии изготовления их опытных образцов. Рязань: ВНТИЦ. 2007. 62 с. [In Russian: Plahtin V.D. & Davydov A.P. & Parshin A.N. Development of methods for the analysis and synthesis of engagement arched spur gears and manufacturing of prototypes. Ryazan: VNTIC].
Беляев, А.И. & Сирицин, А.И. & Сирицин, Д. А. Геометрический расчёт и технология нарезания колёс с арочными зубьями. Вестник машиностроения. 1999. Vol. 1. С. 3-8. [In Russian: Belyaev, A.I. & Siritsin, A.I. & Siritsin, D.A. Geometric calculation and cutting wheel technology with arched teeth. Bulletin of Engineering].
Сызранцев, В. Н. & Сызранцева, К. В. & Варшавский, М. Р. Исследование нагруженности контакта в зацеплении арочных зубьев цилиндрических колес. Вестник Академии транспорта. 1999. Vol. 1. С. 217-220. [In Russian: Syzrantsev, V.N. & Syzrantseva, K.V. & Varshavsky, M.R. Study of loading contact arch of teeth in mesh cylindrical wheels. Bulletin of the Academy of Transport].
Sladkowski, A. & Sladkowski, J. The finite element model construction of a gear segments of the locomotive traction gear. Mechanika. 2004. No. 3. P. 53-58.
Artoni, A. & Harianto, J. Robust Optimization of Cylindrical Gear Tooth Surface Modifications Within Ranges of Torque and Misalignments. Journal of Mechanical Design. 2013. Vol. 12. 9 p.
Fedorov, Y.N. & Artamonov, V.D. & Zolotukhina, O.L. Paired tooth cutting of cylindrical gears. Russian Engineering Research. 2009. Vol. 3. P. 319-321.
Brien, Joseph CO.
[CROSSREF]
Рубин, П.С. & Тарапанов, А.С. Перспективы развития способов обработки цилиндрических колес с арочными зубьями. Фундаментальные и прикладные проблемы техники и технологии. 2012. Vol. 6. С. 78-85. [In Russian: Rubin P.S., Tarapanov A.S. Prospects of development of modes of machining of cylindrical wheels with arch teeth. Fundamental and Applied Problems of Engineering and Technology].