USE OF SURFACE WORKING FOR IMPROVING THE WORKING LIFE OF PISTON VALVES OF COMBUSTION ENGINES

Publications

Share / Export Citation / Email / Print / Text size:

Transport Problems

Silesian University of Technology

Subject: Economics, Transportation, Transportation Science & Technology

GET ALERTS

eISSN: 2300-861X

DESCRIPTION

5
Reader(s)
20
Visit(s)
0
Comment(s)
0
Share(s)

SEARCH WITHIN CONTENT

FIND ARTICLE

Volume / Issue / page

Related articles

VOLUME 15 , ISSUE 3 (September 2020) > List of articles

USE OF SURFACE WORKING FOR IMPROVING THE WORKING LIFE OF PISTON VALVES OF COMBUSTION ENGINES

Krzysztof FILIPOWICZ / Mariusz KUCZAJ * / Stanisław MIKUŁA

Keywords : combustion engine valves; operating damage; burnishing

Citation Information : Transport Problems. Volume 15, Issue 3, Pages 107-116, DOI: https://doi.org/10.21307/tp-2020-037

License : (CC BY 4.0)

Received Date : 27-April-2019 / Accepted: 28-August-2020 / Published Online: 05-September-2020

ARTICLE

ABSTRACT

This paper deals with the issue of operating damage of combustion engine valves. It presents an innovative way and construction of a tool for strengthening piston engine valves by way of surface working. It presents the concept of machines for comprehensive surface working and for profiling the faces of combustion engine valves. It also includes the discussion of the methodology of working.

Content not available PDF Share

FIGURES & TABLES

REFERENCES

1. Deshpande, S. et al. Experimental Investigation and Analysis of Engine Valve Designs for Enhanced Fatigue Life. International Engineering Research Journal. 2015. Vol. 1. No. 2. P. 788- 797.

2. Dindorf, Ch. Ermüdung und Korrosion nach mechanischer Oberflächenbehandlung von Leichtmetallen. PhD thesis. Technischen Universität Darmstadt, 2006. [In Germany: Dindorf, Ch. Fatigue and corrosion after mechanical surface treatment of light metals. PhD thesis. Darmstadt: University of Technology].

3. Gawale, S. & Shelke, S. Diesel Engine Exhaust Valve Design and Optimization. Journal of Mechanical and Civil Engineering. 2016. Vol. 13. No. 4. Ver. IV. P. 85-93.

4. Kocańda, S. Zmęczeniowe pękanie metali. Warszawa: WNT. 1985. [In Poland: Kocańda S. Fatigue cracking of metals. Warsaw: WNT].

5. Kula, P. Inżynieria warstwy wierzchniej. Łódź: Wydawnictwo Politechniki Łódzkiej. 2000. [In Poland: Kula, P. Surface layer engineering. Lodz: Lodz University of Technology Publisher].

6. Lavhale, Y. & Salunke, J. Overview of failure trend of inlet & exhaust valve. International Journal of Mechanical Engineering and Technology. 2014. Vol. 5. No. 3. P. 104-113.

7. Nadziarkiewicz, M. Tłokowe silniki spalinowe w maszynach roboczych. Gliwice: Wydawnictwo Politechniki Śląskiej. 1985. [In Poland: Nadziarkiewicz, M. Reciprocating internal combustion engines in working machines. Gliwice: Silesian University of Technology Publisher].

8. Panțuru, M. & Chicet, D. & Paulin, C. & Alexandru, A. & Munteanu, C. Wear aspects of internal combustion engine valves. In: 7th International Conference on “Advanced Concepts in Mechanical Engineering”. Iasi, 2016. P. 1-7.

9. Podolak-Lejtas, A. Obróbka powierzchniowa zgniotem jako źródło umocnienia warstwy wierzchniej po obróbce elektroerozyjne. Mechanik. 2015. No. 1. P. 1-5. [In Poland: PodolakLejtas, A. Surface treatment with crushing as a source of strengthening the surface layer after electro-erosion treatment. Mechanic].

10. Przybylski, W. Obróbka nagniataniem. Warszawa: WNT. 1979. [In Poland: Przybylski, W. Burnishing. Warsaw: WNT].

11. Przybylski, W. Technologia obróbki nagniataniem. Warszawa: WNT. 1987. [In Poland: Przybylski, W. Burnishing technology. Warsaw: WNT].

12. Thipse, S. S. Internal Combustion Engines. Bombay: Jaico Publishing House. 2008. 788 p.

13. Weroński A. Zmęczenie cieplne metali. Warszawa: WNT. 1983. [In Poland: Weroński, A. Thermal fatigue of metals. Warsaw: WNT].

14. Wied, J. Oberflächenbehandlung von Umformwerkzeugen durch Festklopfen. PhD thesis. Technischen Universität Darmstadt, 2011. [In German: Wied, J. Surface treatment of forming tools by tapping. PhD thesis. Darmstadt: University of Technology].

15. Valve damage and causes – MS Motorservice Techipedia. Available at: https://www.msmotorservice.com/en/technipedia/post/valve-damage-and-causes/.

16. P.426411. Urządzenie do kompleksowej obróbki nagniataniem zaworów silników spalinowych. Politechnika Śląska, Gliwice, Pl. (Mikuła, J. & Kuczaj, M. &Filipowicz, K. & Mikuła, S.) Publ. 23.07.2018. [Machine for comprehensive burnishing of combustion engine valves. Patent application: 23.07.2018].

17. P.428371. Urządzenie do umacniania i profilowania powierzchni przylgni zaworów silników spalinowych. Politechnika Śląska, Gliwice, Pl. (Mikuła, J. & Kuczaj, M. &Filipowicz, K. & Mikuła, S.) Publ. 27.12.2018. [Machine for strengthening and profiling the faces of combustion engine valves. Patent application. 27.12.2018].

EXTRA FILES

COMMENTS